668073
11
Zoom out
Zoom in
Previous page
1/20
Next page
11
WORK
1. PREPARING TO WORK
Before fitting the tanks, it is necessary to carry out certain operations:
1. check the switches are in the off (“0”) position
2. connect the cable to the socket
3. carry out the operations to prepare the machine
4. lower the squeegee command lever in order to start working
5. press the main switch (1) and check the green indicator light comes on
6. press the suction switch (2) and check the green indicator light comes on
7. press the solenoid valve switch (3) and check the green indicator light comes on
At this point, the machine can work efficiently until the detergent solution runs out;
use the operating lever that activates the brushes (4)
2. OVERFLOW DEVICE
The machine is fitted with a float filter which intervenes when the recovery tank is full,
causing the suction tube to close.
In this case, it is necessary to switch off the machine and empty the recovery tank.
ATTENTION: this operation must be carried out using gloves to
protect against contact with dangerous solutions.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Comac VISPA 35E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Comac VISPA 35E in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info