668072
14
Zoom out
Zoom in
Previous page
1/24
Next page
14
WORK
1. PREPARING TO WORK
Before fitting the tanks, it is necessary to carry out certain operations:
5. Open the two rear hinges of the battery compartment
6. Connect the connector to the batteries
7. Close the battery compartment
8. Position the recovery tank on the handlebars, and connect the two tubes
9. Position the solution tank and connect the quick connector
10. carry out the operations to prepare the machine
11. lower the squeegee command lever in order to start working
12. press the main switch (1) and check the green indicator light comes on
13. press the suction switch (2)
14. press the solenoid valve switch (3)
At this point - by using the operating lever that activates the brushes (4) - the machine can work
efficiently until the detergent solution runs out or the batteries run flat
2. OVERFLOW DEVICE
The machine is fitted with a ball filter which is activated when the recovery tank is full, causing the suction
tube to close.
In this case, you must switch off the machine and empty the recovery tank.
WARNING: this operation must be carried out by wearing gloves to protect
against contact with dangerous solutions.
4
3
2
1
Downloaded from www.Manualslib.com manuals search engine
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Comac Vispa 35B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Comac Vispa 35B in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info