A
C
B
MACHINE PREPARATION
1. HANDLING THE PACKAGED MACHINE
The machine is contained within specific packaging.
Every pallet consists of four machines arranged on two levels.
It is not possible to place more than two packages on top of each other.
The total weight is 70kg
The overall dimensions of the package are:
A : 500 mm
B : 500 mm
C : 1150 mm
2. HOW TO UNPACK THE MACHINE
1. Open the packaging on the side indicated.
2. Take the machine out of its packaging.
3. Remove the recovery tank.
3. HANDLING AND TRANSPORTATION OF THE UNPACKAGED MACHINE
Vispa B is a machine that can be managed in all situations and transported without effort, even in small
vehicles.
Just lift the front part, using the machine handlebars as a lever. The big rear wheels mean it can be
towed anywhere and loaded on a truck by means of a simple ramp.
Vispa B is easy to transport even by car. Exploiting the full flexibility of the handlebars, you can fold it up
(see the handlebars fixing section) and, with the help of a colleague, place it in the boot of the car
without disassembling any components.
4. TYPE OF BATTERY
To power the machine it is necessary to use:
• sealed traction batteries with gasrecombination or gel technology
OTHER TYPES MUST NOT BE USED.
The batteries must meet the requisites laid out in the norms CEI EN 60254-1:2005-12 (CEI 21-5) +
CEI EN 60254-2:2008-06 (CEI 21-7).
Every battery consists of DIN-type elements connected in series and providing the clamps with a power
of 12 V. You are advised to use batteries with an electric capacity of 65 Ah (C5)