Manual Cola Medea (page 46 of 132) (English, German, French, Italian, Spanish)

668899

Zoom out

Zoom in

1/132

46 MEDEA – MEDEA LUX

Then set as follows:

− external thermostat: set a temperature of 7°C;

− external chronothermostat: set a temperature of 7°C, disable the chrono functionality in the menu 03 and

set the STANDBY function to ON. When the set temperature is reached, the stove will shut down and not

go to modulation.

In this case, however, it is advisable to use the stove time programming function and only the external

chronothermostat set temperature function.

In fact, only with this joint setting is it possible to set STANDBY to ON or OFF, obtaining respectively

modulation or shutdown when the SET temperature is reached and likewise obtaining shutdown and lighting

according to the set time programming.

When the external thermostat requests stove operation, the corresponding symbol will light up on the display.

4.9 Idle period (end of season)

If the stove is not used for long periods, and/or at the end of each season, it is advisable to proceed as follows

- remove all the pellets from the hopper;

- disconnect the power and remove the power cable;

- clean thoroughly and, if necessary, have any damaged parts replaced by qualified personnel;

- protect the stove from dust with suitable covering;

- store in a dry and safe place protected from atmospheric agents.

5 STOVE CLEANING

Stove cleaning is very important to ensure correct operation and to prevent: blackening of the glass, poor

combustion, deposits of ash and unburnt products in the brazier, reduced thermal efficiency.

The stove must only operate with the fire door closed.

The fire door seals must be checked periodically to prevent any air from entering; the combustion chamber and

pellet duct work in a negative pressure and the fume exhaust in a positive pressure.

Routine cleaning is normally carried out by the customer following the instructions in the manual, whereas

extraordinary maintenance, at least once a year, must be performed by the authorised Service Centre.

- Cleaning operations for all parts must be carried out with the stove unplugged and

cold;

- Dispose of cleaning waste in accordance with the current local regulations;

- The stove must not be operated without its cladding;

- Avoid the creation of smoke and unburnt products during lighting and/or normal operation.

Given below are the control and/or maintenance operations for correct stove use and operation.

Parts / Period

Type of cleaning

1 day

routine

cleaning

2-3 days

routine

cleaning

1 month

routine

cleaning

2-3 months

routine

cleaning

year

extraordinary

cleaning: carried out

by the Service Centre

Brazier

■

Ash compartment-pan

■

Glass

■

Baffle - fume exchanger

■ ■

Manifold - fume extractor

■ ■

Glass - door seal

■

Pipe - flue connection

■

5.1 Cleaning the brazier

Remove the brazier and the ash deposited in the combustion chamber and brazier holder. A suitable vacuum

cleaner may be used for this purpose. This operation must be carried out daily, especially in case of accumulated

unburnt matter, to ensure perfect combustion conditions, since the brazier holes allow the flow of combustion air.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cola Medea in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 9,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cola Medea Manual

Product: