635855
9
Zoom out
Zoom in
Previous page
1/12
Next page
When the EWH is turned on for the first time (or after power outages), a temperature is set on
default at +75°С.
7.3. Models with electronic control by version 2 (Fig.6)
7.3.1. "Demo" mode
In the models equipped with an electronic control panel by version 2 with a digital touch
LED display, when the EWH is turned on for the first time (or after power outages), the water
heater passes, on default, into "Demo" (demonstration) mode. In this mode, the EWH heating
elements are never enabled.
WARNING! Before interrupting "Demo", make sure that the EWH is filled with water.
Passage into and interruption of the "Demo" mode is done (if necessary) by pressing and holding
for 5 seconds keys and on the control panel.
7.3.2. Standby mode
Occurrence of the device in standby mode is accompanied by the flashing of logo
"Thermex," the temperature indicator indicates the temperature of water in the EWH, and the
clock shows the current time.
7.3.3. Heating mode
The EWH can be enabled (disabled) in the heating mode by pressing key . When the
heating mode is enabled, the EWH starts heating water to a preset temperature, and, on reaching
a preset temperature, the heating indicator will light steadily. In the heating mode, the heating
power can be selected by pressing keys and on the control panel. The 2 kW power
mode is accompanied by indication of pilot lamp "Double power," and 1.3 kW by indication of
pilot lamp "Single power."
7.3.4. Timer mode
The timer mode can be enabled (disabled) by pressing key on the control panel and is
accompanied by switching on (off) "Timer" indicator. After passage into the timer mode, the
EWH will be in standby mode until a preset time is reached. On reaching the preset time, the
EWH starts heating water to a preset temperature.
7.3.5. Adjustment of the EWH parameters
When the EWH is in operation, the Consumer can adjust the operating parameters in any
mode. Pressing any key on the control panel is accompanied by a sound signal. After the first
pressing of key (Setting or Selection) the value of "Single power" or "Double power" starts
flashing, and with keys and you may select an appropriate power mode. The second
pressing allows you to set a temperature up to which water will be heated in the EWH, with keys
or you may adjust the parameter up to an appropriate value. Prolonged holding of keys
or allows you to quickly change the parameter. The third pressing of key provides
for setting of the value of current time hours. The fourth pressing allows you to set current time
minutes. The fifth pressing can set an hour of timer in service, and the sixth pressing can set
minutes of timer in service. After the seventh pressing or within 5 seconds of the last pressing of
key the system will return to work. Discreteness of temperature changes -1°С. Temperature
is set on default at +75°C.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cointra Thermex IF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cointra Thermex IF in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cointra Thermex IF

Cointra Thermex IF User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info