653556
18
Zoom out
Zoom in
Previous page
1/125
Next page
Instruction Manual
2 3
PRESENTATION
Movement Caliber : 1069
Movement Caliber
1069
Display Elements
Minute Hand
Hour Hand
Second Hand
Control Buttons
Crown Positions:
1. Normal position
2. Setting of hour, minute
1 2
4 5
Setting the Time
1.1 Pull the crown to position 2.
1.2 Turn the crown clockwise to set the hour / minute hands to the
desired time.
1.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 1069
1.1
1.2 1.3
6 7
Movement Caliber
2330
/
130
&
763
PRESENTATION
Movement Caliber : 2330
/
130
&
763
Display Elements
Minute Hand
Hour Hand
Second Hand
Date
Control Buttons
Crown Positions:
1. Normal position
2. Quick correction of date
3. Setting of hour, minute, date
1 2 3
8 9
Setting the Time
1.1 Pull the crown to position 3.
1.2 Turn the crown clockwise to set the hour / minute hands to the
desired time.
1.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 2330
/
130
&
763
1.1
1.2 1.3
10 11
Quick Correction of Date
3.1 Set the crown to position 2.
3.2 Turn the crown clockwise step-by-step to the desired date.
3.3 Push the crown back to position 1.
!! Attention !!
Please Do Not set between 21:00 and 00:30.
SETTINGS
Movement Caliber : 2330
/
130
&
763
2.1
2.2 2.3
12 13
Movement Caliber
3540.D
PRESENTATION
INFO
Movement Caliber : 3540.D
Crown Positions:
1. Normal position
2. Quick correction of date
3. Correction of hour,
minute, day, date and
second time zone / 24-hour
Display Elements
Minute Hand
Center Stop-Second
1/10 Second Counter
(Hour counter after 30 minutes)
Hour Hand
Minute Counter
Second Hand
Date
Push Button A
Push Button B
Battery: 384
(diametaer 7.9mm x 3.6mm / SR 41 Accuracy: +20 / -10 seconds per monthSW)
Control Buttons
1 2 3
14 15
Setting the Time
Pull out the crown to position 3
(the watch stops)
.*
Turn the crown until you reach the correct time 8:45.
Push the crown back into position 1.*
SETTINGS
Movement Caliber : 3540.D
1.1 1.2
Please note
* In order to set the time to the exact second,
must be pulled out
when the second hand is in position «60».
Once the hour and minute hands have been set,
must be
pushed back into position 1 at the exact second.
16 17
Setting the Date
(Quick Mode)
Pull out the crown to position 2
(the watch continues to run)
.
Turn the crown until the correct date 1 appears.
Push the crown back into position 1.
SETTINGS
Movement Caliber : 3540.D
Please note:
The date can be changed during the date changing phase between 8:30
PM and 12:00 PM; please note that the date must be set to the date of the
following day as in this case, the automatic date changing does not occur at
midnight.
2.1 2.2
18 19
Setting the Date / Time
Example:
– Date / time on the watch: 17 / 1:25 AM
– Present date / time: 4 / 8:30 PM
Pull out the crown to position 2 (the watch continues to run).
Turn the crown until yesterday's date appears 3 .
Pull out the crown to position 3 (the watch stops).*
Turn the crown until the correct date 4 appears.
Continue to turn the crown until the correct time 8:30 PM appears.**
Push the crown back into position 1.
SETTINGS
Movement Caliber : 3540.D
3.3
3.1
3.4
3.2
Please note:
* To set your watch to the exact second, please refer to chapter titled “Setting
the Time”.
** Please observe the AM / PM clock rhythm.
20 21
FUNCTIONS
Movement Caliber : 3540.D
4.1 4.2
A ➊ ➋
B➌
Chronograph: Basic Function
(Start / Stop / Reset)
Example:
Start: Press push button A.
Stop: To stop the timing, press push button A once more and read the
3 chronograph counters: 4 min / 38 sek / 7/10 sec
Zero positioning: Press push button B.
(The 3 chronograph hands will be reset to their zero position).
22 23
FUNCTIONS
Movement Caliber : 3540.D
5.1 5.2
A
➊➋➌➍
B➎
Chronograph: Accumulated Timing
Example:
Start:
(start timing)
Stop:
(e.g. 15 min 5 sec following
)
Restart:
(timing is resumed)
Stop:
(e.g. 13 min 5 sec following
)
= 28 min 10 sec
(The accumulated measured time is shown)
*
Reset: The 3 chronograph hands are returned to their zero position.
Please note:
* Following
, the accumulation of the timing can be continued by pressing push
button A (Restart / Stop, Restart / Stop, …)
24 25
FUNCTIONS
Movement Caliber : 3540.D
6.1 6.2
A
➊➍
B
➋➌
B➎
Chronograph: Intermediate or Interval Timing
Example:
Start:
(start timing)
Display interval: e.g. 10 minutes 10 seconds
(timing continues in the background)
Making up the measured time:
(the 3 chronograph hands are quickly advanced to the ongoing measured time)
.
Stop:
(Final time is displayed)
Reset: The 3 chronograph hands are returned to their zero position.
Please note:
* Following
, the accumulation of the timing can be continued by pressing push
button A (Restart / Stop, Restart / Stop, …)
26 27
7.1
7.2 7.3
CALIBRATION
Movement Caliber : 3540.D
Adjusting the Chronograph Hands to Zero Position
Example:
One or several chronograph hands are not in their correct zero position
and have to be adjusted
(e.g. following a battery change)
.
Pull out the crown to position 3
(all 3 chronograph hands are in their correct or incorrect zero position)
.
Keep push-buttons A and B depressed simultaneously for at least 2
seconds
(the center stop-second rotates by 360°
corrective mode is activated)
.
Adjusting the center stop second
Single step A1 x short
Continuous A long
Adjusting the
next hand B
Adjusting the 1/10 second counter hand (position 6h)
Single step A1 x short
Continuous A long
Adjusting the next hand B
Adjusting the minute counter (position 9h)
Single step A1 x short
Continuous A long
Returning the crown to position 1. Termination of the chronograph
hands adjustment can be carried out at any time.
A➋
B➋
28 29
Movement Caliber
5040.D
INFO
Battery: 395
(diameter 9.5mm x 2.6mm / SR 927 SW) Accuracy: +20 / -10 seconds per month
PRESENTATION
Movement Caliber : 5040.D
Crown Positions:
1. Normal position
2. Quick correction of date
3. Correction of hour,
minute, day, date and
second time zone / 24-hour
Display Elements
Minute Hand
Center Stop-Second
Second Hand
Hour Hand
Minute Counter
1/10 Second Counter
(Hour counter after 30 minutes)
Date Window
Push Button A
Quick correction of month
Push Button B
Quick correction of second
time zone / 24-hour
Control Buttons
1 2 3
30 31
Setting the Time
Pull out the crown to position 3
(the watch stops)
.*
Turn the crown until you reach the correct time 8:45.
Push the crown back into position 1.*
SETTINGS
Movement Caliber : 5040.D
Please note
* In order to set the time to the exact second,
must be pulled out when the
second hand is in position «60».
Once the hour and minute hands have been set,
must be pushed back
into position 1 at the exact second.
1.1 1.2
32 33
2.1 2.2
Setting the Date
(Quick Mode)
Pull out the crown to position 2
(the watch continues to run)
.
Turn the crown until the correct date 1 appears.
Push the crown back into position 1.
SETTINGS
Movement Caliber : 5040.D
Please note:
The date can be changed during the date changing phase between 8:30
PM and 12:00 PM; please note that the date must be set to the date of the
following day as in this case, the automatic date changing does not occur at
midnight.
34 35
3.3
3.1
3.4
3.2
Setting the Date / Time
Example:
– Date / time on the watch: 17 / 1:25 AM
– Present date / time: 4 / 8:30 PM
Pull out the crown to position 2 (the watch continues to run).
Turn the crown until yesterdays date appears 3 .
Pull out the crown to position 3 (the watch stops).*
Turn the crown until the correct date 4 appears.
Continue to turn the crown until the correct time 8:30 PM appears.**
Push the crown back into position 1.
SETTINGS
Movement Caliber : 5040.D
Please note:
* To set your watch to the exact second, please refer to chapter titled “Setting
the Time”.
** Please observe the AM / PM clock rhythm.
36 37
4.1 4.2
A ➊ ➋
B➌
FUNCTIONS
Movement Caliber : 5040.D
Chronograph: Basic Function
(Start / Stop / Reset)
Example:
Start: Press push button A.
Stop: to stop the timing, press push button A once more and read the
3 chronograph counters: 4 min / 38 sek / 7/10 sec
Zero positioning: Press push button B.
(The 3 chronograph hands will be reset to their zero position).
38 39
5.1 5.2
A
➊➋➌➍
B➎
FUNCTIONS
Movement Caliber : 5040.D
Chronograph: Accumulated Timing
Example:
Start:
(start timing)
Stop:
(e.g. 15 min 5 sec following
)
Restart:
(timing is resumed)
Stop:
(e.g. 13 min 5 sec following
)
= 28 min 10 sec
(The accumulated measured time is shown)
*
Reset: The 3 chronograph hands are returned to their zero position.
Please note:
* Following
, the accumulation of the timing can be continued by pressing push
button A (Restart / Stop, Restart / Stop, …)
40 41
6.1 6.2
A
➊➍
B
➋➌
B➎
FUNCTIONS
Movement Caliber : 5040.D
Chronograph: Intermediate or Interval Timing
Example:
Start:
(start timing)
Display interval: e.g. 10 minutes 10 seconds
(timing continues in the background)
Making up the measured time:
(the 3 chronograph hands are quickly advanced to the ongoing measured time)
.
Stop:
(Final time is displayed)
Reset: The 3 chronograph hands are returned to their zero position.
Please note:
* Following
, the accumulation of the timing can be continued by pressing push
button A (Restart / Stop, Restart / Stop, …)
42 43
7.1
7.2 7.3
CALIBRATION
Movement Caliber : 5040.D
Adjusting the Chronograph Hands to Zero Position
Example:
One or several chronograph hands are not in their correct zero position
and have to be adjusted
(e.g. following a battery change)
.
Pull out the crown to position 3
(all 3 chronograph hands are in their correct or incorrect zero position)
.
Keep push-buttons A and B depressed simultaneously for at least 2
seconds
(the center stop-second rotates by 360°
corrective mode is activated)
.
Adjusting the center stop second
Single step A1 x short
Continuous A long
Adjusting the
next hand B
Adjusting the 1/10 second counter hand (position 6h)
Single step A1 x short
Continuous A long
Adjusting the next hand B
Adjusting the minute counter (position 9h)
Single step A1 x short
Continuous A long
Returning the crown to position 1. Termination of the chronograph
hands adjustment can be carried out at any time.
A➋
B➋
44 45
Movement Caliber
6497
PRESENTATION
Movement Caliber : 6497
Display Elements
Minute Hand
Hour Hand
Second Hand
Control Buttons
Crown Positions:
1. Normal position
2. Setting of hour, minute
1 2
46 47
Setting the Time
1.1 Pull the crown to position 2.
1.2 Turn the crown clockwise to set the hour / minute hands to the
desired time.
1.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 6497
1.1
1.2 1.3
48 49
Movement Caliber
7004.P
PRESENTATION
Movement Caliber : 7004.P
Display Elements
Date
Minute Hand
Day
Hour Hand
Second Hand
Control Buttons
Crown Positions:
1. Normal position
2. Setting of hour, minute, day
INFO
Battery: 381 (diameter 11.6mm x 2.15mm)
1 2 3
50 51
Setting the Time
1.1 Pull the crown to position 3.
1.2 Turn the crown to set the hour / minute hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 7004.P
1.1
1.2 1.3
52 53
Setting the Date (Quick Mode)
2.1 Pull the crown to position 2.
2.2 Turn the crown clockwise. Continue to turn the crown until the
desired date is set.
2.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 7004.P
2.1
2.2 2.3
Please note:
An extreme acceleration in setting the date with quick mode can create a false date
indication. The synchronization is re-established by setting the date from 01 till 31
(crown position 2).
54 55
Setting the Day (Quick Mode)
3.1 Set the crown to position 3.
3.2 Turn the crown clockwise to advance the day hand until the desired
day is set.
3.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 7004.P
3.1
3.2 3.3
Please note:
70% of power is saved when the crown is pulled out.
56 57
Movement Caliber
7750
PRESENTATION
Movement Caliber : 7750
Display Elements
30 Minute Counter
Minute Hand
Hour Hand
Second Hand
60 Second Hand
Day
Date
Control Buttons
Crown Positions:
1. Normal position
2. Setting of hour, minute, day
1 2 3
58 59
Crown 3 Positions
Rapid date and day correction is not possible between 8 p.m. and 2 a.m.
1. Normal running of watch and hand-winding
2. Rapid correction of the date
Rapid correction of the day
3. Position for setting the time with stop second and correction of the
date at every passing of midnight
SETTINGS
Movement Caliber : 7750
1.1
Please note:
The movement of the wrist winds the watch.
A
B
60 61
FUNCTIONS
Movement Caliber : 7750
Simple Timing Function
Setting crown in position 1
to
order of functions
START
STOP : Read time
- 2 hours, 10 minutes, 8 seconds
Reset to zero
2.1
62 63
FUNCTIONS
Movement Caliber : 7750
ADD Function
Setting crown in position 1
to order of functions
START
STOP Read
RESTART
STOP Read
RESTART
STOP Read
Reset to zero
3.1
••••••
64 65
Movement Caliber
7751
PRESENTATION
Movement Caliber : 7751
Display Elements
Minute Hand
Month Indicator
30 Minute Counter
Day Indicator
Hand Hour
Second Hand
24 Hour Hand
60 Second Hand
Moon Phase Indicator
12 Hour Counter
Date Hand
Crown Positions:
1. Normal position
2. Correction of hour, minute,
day, date and second time
zone / 24-hour
Push Button B
Split / Reset
Control Buttons
Push Button C
(Option)
Quick correction of day
Push Button A
Quick correction of date.
1 2 3
66 67
Crown 3 Positions
Date correction is not recommended between 10 p.m. and 2 p.m.
The moon phase cannot be corrected between 3 a.m. and 4 a.m.
1. Normal running of watch and hand-winding
2. Rapid correction of the date
Rapid correction of the
moon phase
3. Position for setting the time with stop second and correction of the
date at every passing of midnight
SETTINGS
Movement Caliber : 7751
1.1
Please note:
The movement of the wrist winds the watch.
A
B
68 69
FUNCTIONS
Movement Caliber : 7751
Simple Timing Function
Setting crown in position 1
to
order of functions
START
STOP : Read time
- 4 hours, 10 minutes, 8 seconds
Reset to zero
2.1
70 71
FUNCTIONS
Movement Caliber : 7751
ADD Function
Setting crown in position 1
to order of functions
START
STOP Read
RESTART
STOP Read
RESTART
STOP Read
Reset to zero
3.1
••••••
72 73
Movement Caliber
8040.N
INFO
Movement Caliber : 8040.N
Crown Positions:
1. Normal position
2. Quick correction of date
3. Correction of hour,
minute, day, date and
second time zone / 24-hour
Display Elements
Minute Hand
Day
Hour Hand
Minute Counter
Center Stop-Second
Second Hand
1/10 Second Counter
(Hour counter after 30 minutes)
Date
Push Button A
Push Button B
Battery: 384
(diametaer 7.9mm x 3.6mm / SR 41 Accuracy: +20 / -10 seconds per monthSW)
Control Buttons
1 2 3
74 75
Setting the Time
Pull out the crown to position 3
(the watch stops)
.*
Turn the crown until you reach the correct time 8:45.
Push the crown back into position 1.*
SETTINGS
Movement Caliber : 8040.N
1.1 1.2
Please note
* In order to set the time to the exact second,
must be pulled out
when the second hand is in position «60».
Once the hour and minute hands have been set,
must be
pushed back into position 1 at the exact second.
76 77
Setting the Date
(Quick Mode)
Pull out the crown to position 2
(the watch continues to run)
.
Turn the crown counter clockwise until the correct date 1 appears.
Push the crown back into position 1.
Movement Caliber : 8040.N
Please note:
During the date changing phase between 9 PM and 12 PM; the date must
be set to the date of the following day. An extreme acceleration in setting the
date with quick mode can create a false date indication. The synchronization
is re-established by setting the date from 01 till 31 (crown in position 2).
2.1 2.2
SETTINGS
Setting the Date / Weekday and Time
Example:
– Date / time on the watch: 17 / 1:25 AM / MON
– Present date / time: 23 / 20:30 PM / SAT
Pull out the crown to position 3 (the watch stops).
Turn the crown until yesterday’s weekday FRI appear.
Pull out the crown to position 3.
Turn the crown backwards until yesterday’s date appears 22 .
Pull out the crown to position 3 (the watch stops).*
Turn the crown until the correct date 23 and weekday SAT appears.
Continue to turn the crown until the correct time 8:35 PM appears.**
Push the crown back into position 1.
SETTINGS
Movement Caliber : 8040.N
Please note:
* To set your watch to the exact second, please refer to chapter titled
“Setting The Time”.
** Please observe the AM / PM clock rhythm.
78
3.3
3.1
3.4
3.2
79
80 81
4.1 4.2
A ➊ ➋
B➌
FUNCTIONS
Movement Caliber : 8040.N
Chronograph: Basic Function
(Start / Stop / Reset)
Example:
Start: Press push button A.
Stop: To stop the timing, press push button A once more and read the
3 chronograph counters: 4 min / 38 sek / 7/10 sec
Zero positioning: Press push button B.
(The 3 chronograph hands will be reset to their zero position).
82 83
5.1 5.2
A
➊➋➌➍
B➎
FUNCTIONS
Movement Caliber : 8040.N
Chronograph: Accumulated Timing
Example:
Start:
(start timing)
Stop:
(e.g. 15 min 5 sec following
)
Restart:
(timing is resumed)
Stop:
(e.g. 13 min 5 sec following
)
= 28 min 10 sec
(The accumulated measured time is shown)
*
Reset: The 3 chronograph hands are returned to their zero position.
Please note:
* Following
, the accumulation of the timing can be continued by pressing push
button A (Restart / Stop, Restart / Stop, …)
84 85
6.1 6.2
A
➊➍
B
➋➌
B➎
FUNCTIONS
Movement Caliber : 8040.N
Chronograph: Intermediate or Interval Timing
Example:
Start:
(start timing)
Display interval: e.g. 10 minutes 10 seconds
(timing continues in the background)
Making up the measured time:
(the 3 chronograph hands are quickly advanced to the ongoing measured time)
.
Stop:
(Final time is displayed)
Reset: The 3 chronograph hands are returned to their zero position.
Please note:
* Following
, the accumulation of the timing can be continued by pressing push
button A (Restart / Stop, Restart / Stop, …)
86 87
7.1
7.2 7.3
A➋
B➋
CALIBRATION
Movement Caliber : 8040.N
Adjusting the Chronograph Hands to Zero Position
Example:
One or several chronograph hands are not in their correct zero position
and have to be adjusted
(e.g. following a battery change)
.
Pull out the crown to position 3
(all 3 chronograph hands are in their correct or incorrect zero position)
.
Keep push-buttons A and B depressed simultaneously for at least 2
seconds
(the center stop-second rotates by 360°
corrective mode is activated)
.
Adjusting the center stop second
Single step A1 x short
Continuous A long
Adjusting the
next hand B
Adjusting the 1/10 second counter hand (position 6h)
Single step A1 x short
Continuous A long
Adjusting the next hand B
Adjusting the minute counter (position 9h)
Single step A1 x short
Continuous A long
Returning the crown to position 1. Termination of the chronograph
hands adjustment
(can be carried out at any time)
.
88 89
Movement Caliber
8171 / 204
PRESENTATION
INFO
Movement Caliber : 8171 / 204
Crown Positions:
1. Normal position
2. Quick correction of date
3. Correction of hour,
minute, day, date and
second time zone / 24-hour
Display Elements
Second Hand
Minute Hand
30 Minute Totalizer
Hour Hand
Chronogaph Hand
1/5 Second
Moon Phase Indicator
Date Window
Push Button A
Start / Stop
Push Button B
Split / Reset
Battery: 395-SR 927W
Service Life Battery : Without chrono = 57 months, with chrono 1H/D = 41 months 031213 1 IM - B
Control Buttons
1 2 3
90 91
2.11.1 2.21.2
Set SetReset Reset
SETTINGS
Movement Caliber : 8171 / 204
Setting the Time
To Correct the Date
Caution: Never correct date between 9pm and 0:30am.
92 93
SETTINGS
Movement Caliber : 8171 / 204
To Correct the Moonphase
Set the date according to the last full moon.
Afterwards adapt like steps 3.1 and 3.2.
3.1 3.2
94 95
FUNCTIONS
Movement Caliber : 8171 / 204
After 2 hours of continuous running,
the chrono stops and resets automatically to save the battery.
4.1
4.2
4.3
A
A
B
96 97
FUNCTIONS
Movement Caliber : 8171 / 204
Measuring Split Times
5.1 5.2
Start Split
Restart
Stop Reset
5.3
5.4
5.5
A
B
B
A
B
98 99
CALIBRATION
Movement Caliber : 8171 / 204
After Battery Exchange or Mishandling Only
To reset chronograph, minute and second chronograph.
6.36.1 6.46.2
Enter Exit
Mintue Second
B
B
A
B
100 101
PRESENTATION
Movement Caliber : 8172 / 220
Crown Positions:
1. Normal position
2. Quick correction of date
3. Correction of hour,
minute, day, date and
second time zone / 24-hour
Display Elements
Second Hand
Minute Hand
Hour Hand
30 Minute Counter
Chronograph Hand
1/5 Second
Day
Push Button A
Start / Stop
Push Button B
Split / Reset
Control Buttons
1 2 3
Movement Caliber
8172 / 220
INFO
Battery: 395-SR 57
Service Life Battery: Without chrono = 57 months, with chrono 1H/D = 41 month 0312141 IM - B
102 103
2.1 2.2
Set Reset
To Correct the Day
1.1 1.2
Set Reset
SETTINGS
Movement Caliber : 8172 / 220
Setting the Time
104 105
3.1 3.2
SETTINGS
Movement Caliber : 8172 / 220
Setting the Date
Caution: Never correct date between 9pm and 0:30am.
106 107
4.1
4.2
4.3
A
A
B
FUNCTIONS
Movement Caliber : 8172 / 220
After 2 hours of continuous running,
the chrono stops and resets automatically to save the battery.
108 109
Restart
Stop Reset
5.3
5.4
5.5
B
A
B
FUNCTIONS
Movement Caliber : 8172 / 220
Measuring Split Times
5.1 5.2
Start Split
A
B
110 111
6.3 6.4
Exit
Second
A
B
CALIBRATION
Movement Caliber : 8172 / 220
After Battery Exchange or Mishandling Only
To reset chronograph, minute and second chronograph.
6.1 6.2
Enter
Mintue
B
B
112 113
PRESENTATION
Movement Caliber : 9231 / 1890
Crown Positions:
1. Normal position
2. Setting of hour, minute,
day, date
Display Elements
Minute Hand
Hour Hand
Day
Second Hand
Date
Push Button A
Control Buttons
1 2
Movement Caliber
9231 / 1890
INFO
Battery: 371 – SR920SW
114 115
Setting the Time
1.1 Pull the crown to position 2.
1.2 Turn the crown clockwise to set the hour / minute hands to the
desired time.
1.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9231 / 1890
1.1
1.2 1.3
116 117
Setting the Date
2.1 Pull the crown to position 2.
2.2 Turn the crown clockwise. Continue to turn the crown until
the desired date is set.
2.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9231 / 1890
2.1
2.2 2.3
118 119
Quick Correction of Date
3.1 Set the crown to position 1.
3.2 Press A step-by-step to advance the date until the desired date is set.
!! Attention !!
The date advances at 00:00 midnight, not 12:00 noon.
SETTINGS
Movement Caliber : 9231 / 1890
3.1 3.2
120 121
Setting the Day
4.1 Pull the crown to position 2.
4.2 Turn the crown clockwise to advance the day hand until the
desired day is set. The day hand will advance one day when 04:00
in the morning is reached.
4.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9231 / 1890
4.1
4.2 4.3
122 123
PRESENTATION
Movement Caliber : 9231 / 1900
Crown Positions:
1. Normal position
2. Correction of hour, minute,
day, date, Sun and Moon
Display Elements
Minute Hand
Hour Hand
Day
Second Hand
Sun and Moon
Date
Push Button A
Control Buttons
1 2
Movement Caliber
9231 / 1900
INFO
Battery: 371 – SR920SW
124 125
Setting the Time, Sun and Moon
1.1 Pull the crown to position 2.
1.2 Turn the crown clockwise to set the hour / minute hands and Sun
and Moon to the desired time.
1.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9231 / 1900
1.1
1.2 1.3
126 127
Setting the Date
2.1 Pull the crown to position 2.
2.2 Turn the crown clockwise. Continue to turn the crown until
the desired date is set.
2.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9231 / 1900
2.1
2.2 2.3
128 129
Quick Correction of Date
3.1 Set the crown to position 1.
3.2 Press A step-by-step to advance the date until the desired date is set.
!! Attention !!
The date advances at 00:00 midnight, not 12:00 noon.
SETTINGS
Movement Caliber : 9231 / 1900
3.1 3.2
130 131
Setting the Day
4.1 Pull the crown to position 2.
4.2 Turn the crown clockwise to advance the day hand until the
desired day is set. The day hand will advance one day when 04:00
in the morning is reached.
4.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9231 / 1900
4.1
4.2 4.3
132 133
PRESENTATION
Movement Caliber : 9232 / 1920
Crown Positions:
1. Normal position
2. Quick correction of date
3. Correction of hour, minute,
day, date and second time
zone / 24-hour
Push Button
B
Quick correction of second
time zone / 24-hour
Control Buttons
Push Button A
Quick correction of month
1 2 3
Movement Caliber
9232 / 1920
INFO
Battery: 371 – SR920SW
Display Elements
Month
Minute Hand
Hour Hand
Day
Second Hand
Second time zone /
24 hour
Date
134 135
Setting the Time and 24 Hour
1.1 Pull the crown to position 3.
1.2 Turn the crown clockwise to set the hour, minute and 24 hour
hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9232 / 1920
1.1
1.2 1.3
136 137
Setting the Second Time Zone
2.1 Set the crown to position 1.
2.2 Press B step-by-step to advance the hand of the second time zone
by one hour per step until the desired time is set.
2.3 Stoppressingthebuttonwhennishedsettingthetimezone.
SETTINGS
Movement Caliber : 9232 / 1920
2.1
2.2 2.3
138 139
Setting the Date
3.1 Pull the crown to position 3.
3.2 Turn the crown clockwise. The date will advance 1 day when
the time reaches 00:00 midnight. Continue to turn the crown until
the desired date is set.
3.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9232 / 1920
3.1
3.2 3.3
140 141
Quick Correction of Date
4.1 Pull the crown out to position 2.
4.2 Turn the crown clockwise step-by-step to the desired date.
4.3 Push the crown back to position 1.
!! Attention !!
Please Do Not set between 21:00 and 00:30.
SETTINGS
Movement Caliber : 9232 / 1920
4.1
4.2 4.3
142 143
Setting the Day
5.1 Pull the crown to position 3.
5.2 Turn the crown clockwise to advance the day hand until the
desired day is set. The day hand will advance one day when 04:00
in the morning is reached.
5.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9232 / 1920
5.1
5.2 5.3
144 145
Quick Correction of Day
6.1 Set the crown to position 1.
6.2 Press A step-by-step to adjust the month to the desired one.
6.3 Release the button after completing the setting.
!! Attention !!
Please Do Not use Quick Correction on 31st of each month.
SETTINGS
Movement Caliber : 9232 / 1920
6.1
6.2 6.3
146 147
PRESENTATION
Movement Caliber : 9232 / 1930
Crown Positions:
1. Normal position
2. Quick correction of date
3. Correction of hour, minute, day,
date and second time zone /
24-hour
Push Button
B
Quick correction of second
time zone / 24-hour
Control Buttons
Push Button A
Quick correction of month
1 2 3
Movement Caliber
9232 / 1930
INFO
Battery: 371 – SR920SW
Display Elements
Month
Minute Hand
Hour Hand
Second Hand
Second time zone /
24 hour
Date
148 149
Setting the Time and 24 Hour
1.1 Pull the crown to position 3.
1.2 Turn the crown clockwise to set the hour, minute and 24 hour
hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9232 / 1930
1.1
1.2 1.3
150 151
Setting the Second Time Zone
2.1 Set the crown to position 1.
2.2 Press B step-by-step to advance the hand of the second time zone
by one hour per step until the desired time is set.
2.3 Stoppressingthebuttonwhennishedsettingthetimezone.
SETTINGS
Movement Caliber : 9232 / 1930
2.1
2.2 2.3
152 153
Setting the Date
3.1 Pull the crown to position 3.
3.2 Turn the crown clockwise. The date will advance 1 day when
the time reaches 00:00 midnight. Continue to turn the crown until
the desired date is set.
3.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9232 / 1930
3.1
3.2 3.3
154 155
Quick Correction of Date
4.1 Pull the crown out to position 2.
4.2 Turn the crown clockwise step-by-step to the desired date.
4.3 Push the crown back to position 1.
!! Attention !!
Please Do Not set between 21:00 and 00:30.
SETTINGS
Movement Caliber : 9232 / 1930
4.1
4.2 4.3
156 157
Setting the Day
5.1 Pull the crown to position 3.
5.2 Turn the crown clockwise to advance the day hand until the
desired day is set. The day hand will advance one day when 04:00
in the morning is reached.
5.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9232 / 1930
5.1
5.2 5.3
Movement Caliber
9232 / 1950
INFO
Battery: 371 – SR920SW
158
PRESENTATION
Movement Caliber : 9232 / 1950
Control Buttons
Crown Positions:
1. Normal position
2. Quick correction of date
3. Setting of hour, minute, day,
date
Display Elements
Minute Hand
Hour Hand
Day
Second Hand
Date
1 2 3
159
160 161
1.1
1.2 1.3
Setting the Time
1.1 Pull the crown to position 2.
1.2 Turn the crown clockwise to set the hour / minute hands to the
desired time.
1.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9232 / 1950
162 163
2.1
2.2 2.3
Setting the Date
2.1 Pull the crown to position 2.
2.2 Turn the crown clockwise. Continue to turn the crown until the
desired date is set.
2.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9232 / 1950
164 165
Quick Correction of Date
3.1 Set the crown to position 2.
3.2 Turn the crown clockwise step-by-step to the desired date.
3.3 Push the crown back to position 1.
!! Attention !!
Please Do Not set between 21:00 and 00:30.
SETTINGS
Movement Caliber : 9232 / 1950
3.1
3.2 3.3
166 167
4.1
4.2 4.3
Setting the Day
4.1 Pull the crown to position 2.
4.2 Turn the crown clockwise to advance the day hand until the
desired day is set. The day hand will advance one day when 04:00
in the morning is reached.
4.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9232 / 1950
168 169
Movement Caliber
9238 / 1960
INFO
Battery: 371 – SR920SW
PRESENTATION
Movement Caliber : 9238 / 1960
Display Elements
Minute Hand
Hour Hand
Second Hand
24-Hour /
Second Time Zone
Date
1 2
Crown Positions:
1. Normal Running
2. Setting of Hour, Minute,
Date, 24-Hour
Push Button B
Quick correction of second
time zone / 24-hour
Control Buttons
Push Button A
Quick correction of month
170 171
1.1
1.2 1.3
Setting the Time and 24 Hour
1.1 Pull the crown to position 2.
1.2 Turn the crown clockwise to set the hour, minute and 24 hour
hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9238 / 1960
172 173
2.1
2.2 2.3
Setting the Second Time Zone
2.1 Set the crown to position 1.
2.2 Press B step-by-step to advance the hour hand of the second
time zone until the desired time is set.
2.3 Release the button once set.
!!Attention!!
When using push button B to set the second time zone hour, the center
minute hand must be set to between 55th minute and 05th minute at
any hour.
SETTINGS
Movement Caliber : 9238 / 1960
174 175
Quick Correction of Date
3.1 Pull the crown to position 2.
3.2 Turn the crown clockwise. Continue to turn the crown until the
desired date is set.
3.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9238 / 1960
3.1
3.2 3.3
176 177
Quick Correction of Date
3.1 Set the crown to position 1.
3.2 Press A step-by-step to advance the date until the desired date is set.
!!Attention!!
The date advances at 00:00 midnight, not 12:00 noon.
SETTINGS
Movement Caliber : 9238 / 1960
4.1 4.2
178 179
Movement Caliber
9238 / 1970
INFO
Battery: 371 – SR920SW
PRESENTATION
Movement Caliber : 9238 / 1970
Display Elements
Minute Hand
Hour Hand
Day
Second Hand
Date
24-hour / second
time zone
1 2
Crown Positions:
1. Normal Running
2. Setting of Hour, Minute,
Date, 24-Hour
Push Button B
Quick correction of 24-hour,
second time zone
Control Buttons
Push Button C
(Option)
Quick correction of day
Push Button A
Quick correction of date
180 181
1.1
1.2 1.3
Setting the Time and 24 Hour
1.1 Pull the crown to position 2.
1.2 Turn the crown clockwise to set the hour, minute and 24 hour
hands to the desired time.
1.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9238 / 1970
182 183
2.1
2.2 2.3
Setting the Second Time Zone
2.1 Set the crown to position 1.
2.2 Press B step-by-step to advance the hand of the second time zone
by one hour per step until the desired time is set.
2.3 Release the button after completing the setting.
!! Attention !!
When using push button B to set the second time zone hour, the center
minute hand must be set to between 55th minute and 05th minute at
any hour.
SETTINGS
Movement Caliber : 9238 / 1970
184 185
3.1
3.2 3.3
Setting the Date
3.1 Pull the crown to position 2.
3.2 Turn the crown clockwise. Continue to turn the crown until the
desired date is set.
3.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9238 / 1970
186 187
4.1
4.2 4.3
Quick Correction of Date
4.1 Set the crown to position 1.
4.2 Press A step-by-step to advance the date until the desired date set.
!! Attention !!
The date advances at 00:00 midnight, not 12:00 noon.
SETTINGS
Movement Caliber : 9238 / 1970
188 189
5.1
5.2 5.3
Setting the Day
5.1 Pull the crown to position 2.
5.2 Turn the crown clockwise to advance the day hand until the desired
day is set. The day hand will advance one day when 04:00 in the
morning is reached.
5.3 Push the crown back to position 0.
SETTINGS
Movement Caliber : 9238 / 1970
190 191
6.1
6.2 6.3
Quick Correction of Day
6.1 Set the crown to position 1.
6.2 Press A step-by-step to adjust the month to the desired one.
6.3 Press C twice to advance the day hand by one step until the desired
day is set.
!! Attention !!
Do not use Quick Correction to set the Day between 22:00 at night and
6:00 in the morning.
SETTINGS
Movement Caliber : 9238 / 1970
192 193
Movement Caliber
9239 / 0005
INFO
Battery: 371 – SR920SW Service Life Battery: 40 months 0312204 IM - A
PRESENTATION
Movement Caliber : 9239 / 0005
Display Elements
Minute Hand
Hour Hand
Day
Second Hand
Date
Sun and Moon
1 2
Crown Positions:
1. Normal position
2. Correction of hour, minute,
day, date, Sun and Moon
Push Button B
Quick correction of 12h second
time zone and day / night
Control Buttons
Push Button A
194 195
Setting the Time
1.1 Pull the crown to position 2.
1.2 Turn the crown clockwise to set the hour / minute hands to the
desired time.
1.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9239 / 0005
1.1
1.2 1.3
196 197
2.1
2.2 2.3
Setting the Day
2.1 Pull the crown to position 2.
2.2 Turn the crown clockwise to advance the day hand until the desired
day is set. The day hand will advance one day when 04:00 in the
morning is reached.
2.3 Push the crown back to position 1.
SETTINGS
Movement Caliber : 9239 / 0005
198 199
3.1
3.2 3.3
Quick Correction of Date
3.1 Set the crown to position 1.
3.2 Press A step-by-step to advance the date until the desired date is set.
!! Attention !!
The date advances at 00:00 midnight, not 12:00 noon.
SETTINGS
Movement Caliber : 9239 / 0005
200 201
4.1
4.2 4.3
Setting the Second Time Zone
4.1 Set the crown to position 1.
4.2 Press B step-by-step to advance the hand of the second time zone
by one hour per step until the desired time is set.
4.3 Release the button after completing the setting.
SETTINGS
Movement Caliber : 9239 / 0005
202 203
Movement Caliber
ETA G15.261
PRESENTATION
Movement Caliber : ETA G15.261
Display Elements
5 Minute Counter
Minute Hand
60 Minute Counter
Hour Hand
30 Second Counter
Second Hand
Date Indicator
1 2 3
Crown Positions:
1. Normal position
2. Quick correction of date
3. Correction of hour, minute,
and date
Push Button B
Split / Reset
Control Buttons
Push Button A
Start / Stop
204 205
Setting the Counters to Zero
Setting crown in position 2 or 3
1.1 B. Set the hand of the 60 minute counter to zero
1.2 A. Set the hand of the 30 second counter to zero
B. Set the hand of the 5 minute counter to zero
SETTINGS
Movement Caliber : ETA G15.261
1.1
B B
A
1.2
206 207
Crown 3 Positions
1. Normal running of watch
2. Rapid correction of the date
3. Position for setting the time with stop second and correction of the
date at every passing or midnight.
Please note:
Setting crown in position 3 : STOP-SECOND
SETTINGS
Movement Caliber : ETA G15.261
2.1
208 209
Simple Timing Function
Chronograph stops after 2 hours.
t
o
order of functions
START
STOP STOP: Read time
- 5 minutes, 57 seconds
Reset to zero
Movement Caliber : ETA G15.261
3.1
WARNING
Before starting the time, put the chronograph hands back to their original
position. If necessary, see paragraph "Setting The Timers To Zero".
FUNCTIONS
210 211
ADD Function
Setting crown in position 1
to order of functions
START
STOP Read
RESTART
STOP Read
RESTART
STOP Read
Reset to zero
Movement Caliber : ETA G15.261
4.1
FUNCTIONS
212 213
SPLIT-TIME or INTERMEDIATE TIMES Function
Setting crown in position 0
to
order of functions
START
SPLIT 1: Read time 1
- 6 minutes, 4 seconds
RESTART
(catching-up)
SPLIT 2: Read time 2
- 15 minutes, 36 seconds
RESTART
(catching-up)
STOP: Read FINAL TIME
- 25 minutes, 18 seconds
Reset to zero
Movement Caliber : ETA G15.261
5.3
5.1
B
A
B
B
5.4
5.2
FUNCTIONS
214 215
28
Movement Caliber
8171 / 201
PRESENTATION
Movement Caliber : 8171 / 201
Display Elements
Second Hand
Minute Hand
30 Minute Totalizer
Hour Hand
Chronogaphe Hand
1/5 Second
Date Window
1 2 3
Crown Positions:
1. Normal position
2. Quick correction of date
3. Correction of hour, minute,
day, date and second time
zone / 24-hour
Push Button B
Split / Reset
Control Buttons
Push Button A
Start / Stop
INFO
Battery: 395-SR 927W Service Life Battery: Without chrono = 57 months,
with chrono 1H/D = 41 months 031213 1 IM - B
216 217
SETTINGS
Movement Caliber : 8171 / 201
28
1
28
3
1.1 2.11.2 2.2
Setting the Time
Setting the Date
Caution: Never correct date between 9pm and 0:30am.
218 219
Measuring Cumulative Times
After 2 hours of continuous running, the chrono stop and resets
automatically to save the battery.
SETTINGS
Movement Caliber : 8171 / 201
28
28
28
3.3
A
A
B
3.4 3.5
220 221
Movement Caliber : 8171 / 201
Measuring Split Times
FUNCTIONS
28
28
4.1 4.2
28
28
28
4.3
4.4 4.5
Restart
Stop Reset
B
A
B
Start Split
A
B
222 223
Movement Caliber : 8171 / 201
After Battery Exchange or Mishandling Only
To reset chronograph, minute and second chronograph
28
28
28
28
5.3
5.1
B
A
B
B
Enter
Exit
Seconds
5.4
5.2
FUNCTIONS
224 225
Movement Caliber
9230 / 0005
Movement Caliber : 9230 / 0005
Display Elements
24 Hour
Minute Hand
Hour Hand
Day
Second Hand
12 Hour Time Zone
Date
1 2 3
Control Buttons
Push Button B
INFO
Battery: 371-SR 920 SW Service Life Battery: 40 months
PRESENTATION
226 227
Movement Caliber : 9230 / 0005
1.1 2.11.2 2.2
Setting the Time
Setting the Day
SETTINGS
228 229
SETTINGS
Movement Caliber : 9230 / 0005
3.1 4.13.2 4.2
Quick Date Correction
Caution : Never correct date between 9pm and 0:30am.
Setting the Second Time Zone and Day and Night
230 231
Movement Caliber
SW200
PRESENTATION
Movement Caliber : SW200
Display Elements
Minute Hand
Hour Hand
Second Hand
Day
Date
1 2 3
Control Buttons
Crown Positions:
1. Normal position
2. Setting the date
3. Setting of hour, minute, day
232 233
SETTINGS
Movement Caliber : SW200
Setting the Time
1.1 Pull out the crown to the second position.
1.2 Turn the crown to set hour and minute hands.
(Check that AM/PM is set correctly.)
1.3 Push the crown back in to the position 1.
1.1
1.2 1.3
234 235
SETTINGS
Movement Caliber : SW200
Setting
the
Day
2.1 Pull out the crown to the position 2.
2.2 Turn the crown to right for day setting.
2.3 Push the crown back in to the position 1.
Please note
Do not set the calendar between 9:00P.M. and 4:00A.M. If the
setting of the calendar is made during this period, the day will not
change to the next day. Please set the calendar after changing the
time other than the above period.
2.1
2.2 2.3
236 237
SETTINGS
Movement Caliber : SW200
Setting the Date
3.1 Pull out the crown to the position 2.
3.2 Turn the crown to left for date setting.
3.3 Push the crown back in to the position 1.
3.1
3.2 3.3
Please note
Do not set the calendar between 9:00P.M. and 4:00A.M. If the setting
of the calendar is made during this period, the date will not change to
the next date. Please set the calendar after changing the time other
than the above period.
238 239
SETTINGS
Movement Caliber : SW200
To Start the Watch
4.1 Swing the watch side to side for 30 or more seconds.
240 241
Movement Caliber
638 / 101
PRESENTATION
Movement Caliber : 638 / 101
Display Elements
Minute Hand
Hour Hand
Second Hand
1 2
Control Buttons
Crown Positions:
1. Normal position
2. Setting the Time
242 243
SETTINGS
Movement Caliber : 638 / 101
Setting the Time
1.1 To set the time, gently pull out the crown to the first click stop
positionand rotate to the time of day.
1.2 After setting the time, push the crown back to its normal operating
position. The watch will begin running again.
1.1 1.2
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Coifman Cal 7004.P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Coifman Cal 7004.P in the language / languages: English as an attachment in your email.

The manual is 9,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info