538235
6
Zoom out
Zoom in
Previous page
1/20
Next page
EasySet Programming
Nothing comes close to a Cobra
®
9
EasySet Programming
8
English
Y
our Detector
Y
our Detector
EasySet Programming Menu
Mode Tone Or Voice Visual Setting
Result
Set City
mode
default*
Two (2) beeps City X A single beep sounds when the
signal is first detected.
One (1) beep City X
beep Off
Audio for all X band alerts are blocked
until signal strength reaches Level 3.
One (1) beep City X+K Combines the City X mode with
prevention of K band audio alerts
until signal strength reaches Level 2.
IntelliMute
mode
Two (2) beeps IntelliMute On All alerts (except for strobe signals
from emergency vehicles) are
automatically muted below the
engine rev point you set.
One (1) beep IntelliMute Off Normal operation.
Set IntelliMute
RPMs
(not shown
if IntelliMute
is off)
One (1) beep Set IntelliMute
(see page 15
to set activation
point)
Allows you to set the engine
rev point while using IntelliMute.
AutoMute
mode
Two (2) beeps AutoMute On The audio volume of all alerts will be
automatically muted after four (4) seconds
for as long as the signal is detected.
One (1) beep AutoMute Off All alerts will sound at full volume
for as long as the signal is detected.
Set compass One (1) beep Set Compass
(see page 17
to calibrate
compass)
Allows you to calibrate the compass.
Pop Detect
mode
Two (2) beeps Pop Detect On The unit will detect Pop signals.
One (1) beep Pop Detect Off The unit not will detect Pop signals.
EasySet Programming Menu
Mode Tone Or Voice Visual Setting
Result
VG-2 Detect
mode
Two (2) beeps VG-2 Detect On The unit will detect VG-2 signals.
One (1) beep VG-2 Detect Off The unit will not detect VG-2 signals.
VG-2 Audio
mode (not
shown if VG-2
detect is off)
Two (2) beeps VG-2 Audio On With VG-2 Detect on, the unit will give
audible alerts for VG-2 signals.
One (1) beep VG-2 Audio Off With VG-2 Detect off, the unit will give
only visual alerts for VG-2 signals.
Spectre 1
Detect mode
Two (2) beeps Spectre 1
Detect On
The unit will detect Spectre 1 signals.
One (1) beep Spectre 1
Detect Off
The unit will not detect Spectre 1 signals.
Spectre 1
Audio mode
(not shown if
Spectre 1
detect is off)
Two (2) beeps Spectre 1
Audio On
With Spectre 1 Detect on, the unit will
give audible alerts for Spectre 1 signals.
One (1) beep Spectre 1
Audio Off
With Spectre 1 Detect off, the unit will give
only visual alerts for Spectre 1 signals.
SmartPower
mode
Two (2) beeps SmartPower
On
SmartPower is on.
One (1) beep SmartPower
Off
SmartPower is off.
X Band detect
mode
Two (2) beeps X Band On The unit will detect X Band signals.
One (1) beep X Band Off The unit will not detect X Band signals.
Set display
Dim mode
default*
Two (2) beeps Display Dim Partially dimmed for dusk or night driving.
One (1) beep Display
Dimmer
More dimmed for dusk or night
driving.
One (1) beep Display Dark Display is off.
Restore
factory
settings
One (1) beep Restore
Factory
Settings
Resets user modes and settings to
factory default.
Exit program One (1) beep EXIT
PROGRAM
Allows you to exit Program mode.
* The settings for these user modes can also be changed with the one (1) button method.
See description of each user mode (pages 10 and 24) for details.
This EasySet programming menu lists all of the modes and settings
you can choose from after you have entered Program mode as
described on page 7.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra XRS777 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra XRS777 in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info