634453
19
Zoom out
Zoom in
Previous page
1/24
Next page
MAINTENANCE
WARNING! Before carrying out any repairs or
servicing work, you must ensure that the product
has been disconnected from the power supply. Repairs
and maintenance work other than those described
within this instruction manual may be performed only by
an authorised service agent.
1. SERVI
CE AND STORAGE
To ensure long and reliable service, carry out the following
maintenance regularly. Servicing and cleaning work on the
product and the removal of the guards may only be carried
out after the motor has been switched off and the plug
disconnected from the power supply.
1). Regularly check for obvious defects such as loose,
dislodged or damaged chain and guide bar, loose
fixings and worn or damaged components.
2). Check that covers and guards are undamaged and
correctly fitted. Carry out necessary maintenance or
repairs before using the product.
3). If the cutting device should happen to fail despite the
care taken in manufacturing and testing, repair should be
carried out by an authorised specialist.
4). Do not clean the product while it is running.
5). Ensure that all the fastening elements (screws, nuts,
etc.) are tight at all times so that you can safely work with
the product.
6). Check the pr
oduct frequently for signs of wear. Replace
worn or damaged parts.
7). Store your product in a dry place. To ensure a long
service life all screw parts should be cleaned and then oiled.
8). Clean the product with a brush or cloth. Do not use any
solvents or water to remove dirt.
9). The component that is subject to most wear is the cutting
device. You should therefore check the condition of the cutting
device and its mounting at regular intervals.
- If the cutting device is worn or blunt it must be replaced
immediately.
- If the product starts to vibrate excessively, this means
that the cutting device has not been balanced correctly or
has suffered deformation due to impacts. In this case it
must be repaired or replaced.
26/02/2013 v1
19
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra S32E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra S32E in the language / languages: English as an attachment in your email.

The manual is 5,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info