634419

Cobra RM46SPCE Manual

11
Zoom out
Zoom in
Previous page
1/19
Next page
- 11 -
Keep hands and feet away from the rotating parts. Do not start the engine when standing in front of the
discharge opening.
6.3 OPERATION PROCEDURES
During operation, tightly hold the brake handle with both hands.
Note: During operation, when the brake handle is released, the engine will stop and thus stop the lawnmower
from operating.
6.4 TO STOP ENGINE
CAUTION: The blade continues to rotate for a few seconds after the engine is shut off.
1. Release the brake control handle to stop the engine and blade.
2. Disconnect and ground the spark plug wire as instructed in the separate engine manual to prevent
accidental starting while equipment is unattended.
Fig.7
6.5 CONNECTION FOR AUTO DRIVE – SELF PROPELLED
After starting the engine, push the Self-drive control handle forward towards the upper handle, the lawnmower
will move forward automatically at a speed of about 3.6 km/h, release the self-drive handle, the lawnmower will
stop moving.
Fig.8
CAUTION: your mower is designed to cut normal residential grass of a height no more than 250mm.
Do not attempt to mow through unusually tall dry or wet grass (e.g., pasture) or piles of dry leaves. Debris may
build up on the mower deck or contact the engine exhaust presenting a potential fire hazard.
6.6 FOR THE BEST RESULTS WHEN MOWING
Clear lawn of debris: Be sure that the lawn is clear of stones, sticks, wire or other objects, which could be
accidentally thrown out by the mower in any direction and cause serious injury to the operator and others as
well as damage to property and surrounding objects.
Avoid cutting wet grass: For effective mowing do not cut wet grass, because it tends to stick to the underside
of the deck preventing proper mowing of the grass clippings.
General Recommendations: The recommended cut for mowing is 1/3 the length of the grass, to ensure a
healthy drought resistant lawn. When mowing long grass you may have to cut the lawn in two passes, lowering
the blade another 1/3 of the length for the second cut and perhaps cutting in a different pattern than was used
the first time. Overlapping the cut a little on each pass will also help to clean up any stray clippings left on the
lawn. The mower should always be operated at full throttle to get the best cut and allow it to do the most
effective job of mowing.
Clean underside of deck: Be certain to clean the underside of the cutting deck after each use to avoid a
build-up of grass, which may affect the grass collection. The lawnmower is ideal for collecting leaves during the
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra RM46SPCE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra RM46SPCE in the language / languages: English as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info