Manual Cobra RM46C (page 9 of 19) (English)

634415

Zoom out

Zoom in

1/19

- 9 -

1. To fit: raise the rear cover and hitch the grass catcher on the rear of mower. (Fig. 2F, Fig.2G, Fig. 2H)

2. To remove: grasp and lift the rear cover, remove grass catcher.

Fig. 2F Fig. 2G Fig.2H

5.3 STARTER HANDLE

Engage the Brake control handle then move the starter handle from the engine to the rope guide.

Fig.3A for the Briggs engine Fig.3B for the Cobra engine

5.4 HEIGHT OF CUT

Apply outward pressure to disengage the lever from the rack. Move lever forward or back to adjust height.

(Fig.4 and see clause 6.9)

Fig. 4

5.5 Rear Roller

Your mower features a rear roller, which helps cut right up to the edge of borders and creates a traditional

striped lawn finish. It is recommended to alternate the direction of mowing periodically, to improve turf growth.

Vary the height of cut depending on the lawn and weather conditions.

Fig.5A Fig.5B Change the cutting pattern alternate weeks

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cobra RM46C in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cobra RM46C Manual

Product: