Manual Cobra MX51SPH (page 13 of 20) (English)

634405

Zoom out

Zoom in

1/20

- 13 -

Start the engine carefully according to the instructions and with feet well away from the blade.

Do not tilt the lawn mower when starting the engine. Start the mower on a level surface, free of high grass or obstacles.

Keep hands and feet away from the rotating parts. Do not start the engine when standing in front of the discharge opening.

7.3 OPERATION PROCEDURES

During operation, tightly hold the brake handle with both hands.

Note: During operation, when the brake handle is released, the engine will stop and thus stopping the lawnmower from operating.

7.4 TO THE STOP THE ENGINE

1. Release the brake control handle to stop the engine and blade.

2. Disconnect and ground the spark plug wire as instructed in the separate engine manual to prevent accidental starting while

equipment is unattended.

Fig.9

CAUTION: The blade continues to rotate for a few seconds after the engine is shut off.

7.5 CONNECTION FOR AUTO DRIVE – SELF PROPELLED

Engage the Self-drive control handle, the lawnmower will move forward automatically at a speed of about 3.6km/h, release the

self-drive handle and the lawnmower will stop moving. (Fig.10A)

Fig.10A Fig.10D

CAUTION: your mower is designed to cut normal residential grass of a height no more than 250mm.

Do not attempt to mow through unusually tall dry or wet grass (e.g., pasture) or piles of dry leaves. Debris may build up on the

mower deck or contact the engine exhaust presenting a potential fire hazard.

7.6 FOR THE BEST RESULTS WHEN MOWING

First clear the lawn of debris: Be sure that the grass is clear of stones, sticks, wire or other objects, which could be accidentally

thrown out by the mower in any direction and cause serious injury to the operator and others as well as damage to property and

surrounding objects.

Avoid cutting wet grass: For effective mowing do not cut wet grass, because it tends to stick to the underside of the deck

preventing proper mowing of the grass.

General Recommendations: Cut no more than 1/3 the length of the grass.

Ground speed will need to be adjusted to aid the even distribution of clippings onto the lawn.

For especially heavy cutting in thick grass it may be necessary to use one of the slowest speeds in order to get a clean well

mowed cut. When mowing long grass you may have to cut the lawn in two passes, lowering the blade another 1/3 of the length

for the second cut and perhaps cutting in a different pattern than was used the first time. Overlapping the cut a little on each pass

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MX51SPH in the language / languages: English as an attachment in your email.

The manual is 1,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cobra MX51SPH Manual

Product: