Manual Cobra MX515SPBI - DYM1588SD (page 12 of 19) (English)

634408

Zoom out

Zoom in

1/19

- 12 -

Start the engine carefully according to instructions and with feet well away from the blade.

Do not tilt the lawn mower when starting the engine. Start the mower on a level surface, free of high grass or obstacles.

Keep hands and feet away from the rotating parts. Do not start the engine when standing in front of the discharge opening.

7.3 OPERATION PROCEDURES

During operation, tightly hold the brake handle with both hands.

Note: During operation, when the brake handle is released, the engine will stop and thus stopping the lawnmower from operating.

Warning!

In order to avoid any unintentional start-ups of the lawn mower, it comes equipped with an engine brake which must be

pulled back before the engine can be started. When the engine control lever is released it must return to its initial position, at

which point the engine automatically switches off.

Note: Engine brake (brake handle): Use the lever to stop the engine. When you release the lever the engine and the blade stop

automatically. To mow, hold the lever in the working position. Before you start to mow, check the start/stop lever several times to

be sure that it is working properly. Ensure that the tension cable can be smoothly operated (i.e. is not catching or kinking in any

way)

7.4 TO STOP ENGINE

CAUTION: The blade continues to rotate for a few seconds after the engine is shut off.

1. Release the brake control handle to stop the engine and blade.

2. Disconnect and ground the spark plug wire as instructed in the separate engine manual to prevent accidental starting while

equipment is unattended.

7.5 POWER DRIVE - SELF PROPELLING

Grip the self-drive control handle, the lawnmower will move forward automatically (Fig.10A), release the self-drive handle, the

lawnmower will stop moving.

The mower is equipped with a speed adjusting system which can adjust 5 speeds (3.0km/h-4.5 km/h 0.3).

Position 1: the slowest position; Position 5: the fastest position.

Follow the steps below to change the speed:

1. Release the self-drive control handle until the lawn mower stops.

2. Adjust the appropriate speed which you want. (Fig.10B)

3. Grasp the Self-drive control handle to continue mowing. (Fig.10A)

Fig.10A Fig.10B

CAUTION: your mower is designed to cut normal residential grass of a height no more than 250mm.

Do not attempt to mow through unusually tall dry or wet grass (e.g., pasture) or piles of dry leaves. Debris may build up on the

mower deck or contact the engine exhaust presenting a potential fire hazard.

7.6 FOR THE BEST RESULTS WHEN MOWING

Clear lawn of debris. Be sure that the lawn is clear of stones, sticks, wire or other foreign objects, which could be accidentally

thrown out by the mower in any direction and cause serious personal injury to the operator and others as well as damage to

property and surrounding objects. Do not cut wet grass. For effective mowing do not cut wet grass because it tends to stick to the

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MX515SPBI - DYM1588SD in the language / languages: English as an attachment in your email.

The manual is 1,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cobra MX515SPBI - DYM1588SD Manual

Product: