634408
6
Zoom out
Zoom in
Previous page
1/19
Next page
- 6 -
Stop the engine and disconnect the spark plug wire, make sure that all moving parts have come to a complete stop and, where
a key is fitted remove the key:
- before clearing blockages or unclogging chute.
- before checking, cleaning or working on the lawn mower.
- after striking a foreign object. Inspect the lawnmower for damage and make repairs before restarting and operating the lawn
mower.
- If the lawn mower starts to vibrate abnormally (check immediately).
Stop the engine and disconnect the spark plug wire, make sure that all moving parts have come to a complete stop and, where
a key is fitted remove the key:
- whenever you leave the lawn mower.
- before refueling.
Reduce the throttle setting during engine shut down and, if the engine is provided with a shut-off valve, turn the fuel off at the
end of mowing.
Maintenance and storage
Keep all nuts, bolts and screws tight to be sure the equipment are in safe working condition.
Never store the equipment with petrol in the tank inside a building where fumes can reach an open flame or spark.
Allow the engine to cool before storing in any enclosure. Clean and maintain the lawnmower before storage.
●To reduce the fire hazard; keep the engine, silencer, battery compartment and petrol storage area free of grass, leaves, or
excessive grease.
Check the grass catcher frequently for wear or deterioration.
Replace worn or damaged parts for safety.
If the fuel tank has to be drained, this should be done outdoors.
Improper maintenance, use of non-conforming replacement components, or the removal or modification of safety components
can damage the lawnmower and injure the operators seriously.
Only use the recommended blades and spare parts by the manufacturer. The use of non-genuine parts can damage the
machine and injure the operators. Keep the lawnmower in good working condition.
If the blade stopping device doesn’t work, please contact service center for help.
Warning: Do not touch rotating blade.
Warning: Refuel in a well ventilated area with the engine stopped.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra MX515SPBI - DYM1588SD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MX515SPBI - DYM1588SD in the language / languages: English as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info