634402

Cobra MX46SPB Manual

12
Zoom out
Zoom in
Previous page
1/19
Next page
- 12 -
7.3 OPERATION PROCEDURES
During operation, tightly hold the brake handle with both hands.
Note: During operation, when the brake handle is released, the engine will stop and thus stop the lawnmower from operating.
7.4 TO STOP ENGINE
CAUTION: The blade continues to rotate for a few seconds after the engine is shut off.
1. Release the brake control handle to stop the engine and blade. (Fig.10)
2. Disconnect and ground the spark plug wire as instructed in the separate engine manual to prevent accidental starting while
equipment is unattended.
Fig.10
7.5 CONNECTION FOR AUTO DRIVE – SELF PROPELLED OPTION
For MX46SPB
Grip the Self-drive control handle, the lawnmower will move forward automatically with a speed of about 3.6km/h (Fig.11B),
release the self-drive handle, the lawnmower will stop moving.
Fig.11B
CAUTION: your mower is designed to cut normal residential grass of a height no more than 250mm.
Do not attempt to mow through unusually tall dry or wet grass (e.g., pasture) or piles of dry leaves. Debris may build up on the
mower deck or contact the engine exhaust presenting a potential fire hazard.
7.6 FOR THE BEST RESULTS WHEN MOWING
Clear lawn of debris: Be sure that the lawn is clear of stones, sticks, wire or other objects, which could be accidentally thrown
out by the mower in any direction and cause serious injury to the operator and others as well as damage to property and
surrounding objects.
Avoid cutting wet grass: For effective mowing do not cut wet grass, because it tends to stick to the underside of the deck
preventing proper mowing of the grass clippings.
General Recommendations: Cut no more than 1/3 the length of the grass. The recommended cut for mowing is 1/3 the length
of the grass. Ground speed will need to be adjusted so the clippings can be dispersed evenly into the lawn. For especially heavy
cutting in thick grass it may be necessary to use one of the slowest speeds in order to get a clean well mowed cut. When mowing
long grass you may have to cut the lawn in two passes, lowering the blade another 1/3 of the length for the second cut and
perhaps cutting in a different pattern than was used the first time. Overlapping the cut a little on each pass will also help to clean
up any stray clippings left on the lawn. The mower should always be operated at full throttle to get the best cut and allow it to do
the most effective job of mowing.
Clean underside of deck: Be certain to clean the underside of the cutting deck after each use to avoid a build-up of grass, which
would prevent proper mulching. Mowing leaves. The mowing of leaves can also be beneficial to your lawn. When mowing leaves
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra MX46SPB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MX46SPB in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info