538298
24
Zoom out
Zoom in
Previous page
1/42
Next page
43
Nothing Comes Close to a Cobra
®
Mobile Phone Operation
With Bluetooth
®
Using Voice Dial
This feature allows you to use your voice to dial a contact
from the contact list on your mobile phone.
NOTE
Voice dialing is an advanced function and may not be
supported by all phones. Cobra suggests you set it up
and become familiar with it on your mobile phone
before you attempt using it in conjunction with the
radio or another Bluetooth device.
To Initiate a Voice Dial Call:
1. Press and release the Bluetooth button to enter the
Bluetooth Standby mode.
2. Press and release the Bluetooth button twice (2x)
from Bluetooth Standby mode. This will initiate the
voice dial feature on the connected mobile phone.
3. You will hear a beep or audio command from the phone.
Press and hold the PTT (Push to Talk) button and
speak the name into the radio.
4. The mobile phone will begin to dial the contact
it “recognizes.” The call will be completed through
the speaker and microphone of the radio. The matrix
will display DIALING and IN CALL as the call
is completed.
5. Hang up by pressing the Bluetooth button when
you complete your call.
MEMATIS VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
CIU
MEMSAME
Connecting a Voice Dial Call
MEMSAMEATIS VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
CIU
MEMSAME
Initiating a Voice Dial Call
VHF Marine Radio Protocols
Operating Your Radio
42
English
Mobile Phone Operation
With Bluetooth
®
VHF Marine Radio Protocols
Operating Your Radio
Last Number Redial
This feature allows you to redial the last number stored in the
mobile phone’s internal Call Log. This feature is supported by
most mobile phones.
To Initiate a Last Number Redial:
1. Press and release the Bluetooth button to enter the
Bluetooth Standby mode.
2. From Bluetooth Standby, press and hold the
Bluetooth button for two (2) seconds [until the
radio beeps two (2) times].
3. The connected mobile phone will redial the last
number. The call will be complete through the
speaker and microphone of the radio.
4. Hang up by pressing the Bluetooth button when
you complete your call.
To Disconnect (At the End of the Day)
You might not want to take your calls through this VHF radio
once you are back at the dock or in a dry location. See the
instructions in the Bluetooth Mode Programming section on
page 23 for instructions on how to turn Off the Bluetooth
function of the radio. The matrix will display BLUETOOTH
RADIO OFF.
NOTE
If switched to Off setting, then the radio will not
reconnect with mobile phone on power up. It must
be turned back On again from the Bluetooth
Programming mode.
MEMATIS VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
CIU
MEMSAME
MEMSAMEATIS VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
CIU
MEMSAME
EN
C
M
Bluetooth Button
Bluetooth Radio On
Bluetooth Radio Off
500_VHF_Body_v8_MRHH330_ENG_Body 3/26/13 11:13 AM Page 42
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra MR HH500 FLT BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MR HH500 FLT BT in the language / languages: English as an attachment in your email.

The manual is 4,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info