538298
21
Zoom out
Zoom in
Previous page
1/42
Next page
37
Nothing Comes Close to a Cobra
®
Advanced Operation
Channel Scan Mode
During Channel Scan mode, the radio will rapidly switch
from channel to channel through all the channels.
NOTE
The radio must be squelched for Channel Scan mode
to function. See page 18 for Squelch procedure.
To Enter Channel Scan:
1. From Marine Standby mode, press the SCAN button.
The radio will immediately begin to scan the entire
channel map selected in the active channel map.
CHANNEL SCAN will display on the matrix.
2. A signal on any channel will stop the scan for 10
seconds to allow you to listen to the traffic on that
location. After 10 seconds, the radio will resume
scanning.
3. Press the Channel Up/Down button to resume
scanning before the 10-second pause has completed
or to change the scan direction.
4. To EXIT Channel Scan mode, press the SCAN button
again. The SCAN icon will disappear from the LCD
and the radio will return to Marine Standby mode.
VHF Marine Radio Protocols
Operating Your Radio
SCAN
ESC
MEM
SCAN Button
MEMSAMEATIS VOX
LO MEDHI
VHF
T
R
A
B
GMRS
X
CIU
SCAN Icon
ENT SETUP
CALL
MARINE HH50
Channel Up/Down Buttons
VHF Marine Radio Protocols
36
English
Advanced Operation
Operating Your Radio
Memory Location Scan Mode
During Memory Location Scan mode, the radio will rapidly
scan through all pre-assigned memory channels.
NOTE
The radio must be squelched for Memory Location
Scan mode to function. See page 18 for Squelch
procedure.
NOTE
If there are fewer than two (2) memory locations
programmed in the radio, the Memory Location Scan
option will not be available. To program at least two
(2) memory locations, see page 34.
To Enter Memory Location Scan:
1. From Marine Standby mode, press the MEM/ESC
button.
2. Press the SCAN button. The radio will immediately
begin to scan all pre-assigned memory channels.
The MEM icon will show on the LCD, and MEM
CHAN SCAN will display on the matrix along with the
memory location.
3. A signal on any channel will stop the scan for 10
seconds to allow you to listen to the traffic on that
location. After 10 seconds, the radio will resume
scanning.
4. Press the Channel Up/Down button to resume
scanning the Memory Location Scan channels
before the 10-second pause has completed or to
change the scan direction.
5. To EXIT Memory Location Scan mode, press the
SCAN button again. The MEM icon will disappear
from the LCD and the radio will return to Marine
Standby mode.
MEMSAMEVOX
LOMEDHI
VHF
T
R
A
B
X
CIU
Memory Channel Scan
W
ESC
MEM
ENT SETUP
C
MEM/ESC Button
SCAN
ESC
MEM
SCAN Button
500_VHF_Body_v8_MRHH330_ENG_Body 3/26/13 11:13 AM Page 36
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra MR HH500 FLT BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MR HH500 FLT BT in the language / languages: English as an attachment in your email.

The manual is 4,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info