538298
16
Zoom out
Zoom in
Previous page
1/42
Next page
Standby/Receive
and Transmit
Programming these features will allow your radio to listen to
all NOAA Hazard Alert radio channels.
Start from WX Alert Standby mode to begin WX Alert Setup
programming. Press and hold the Call/Enter/Setup button for
two (2) seconds to enter the programming mode.
To Set WX Alert On or Off:
1. WX Alert mode is the first mode that begins
WX Alert Setup programming. From the WX Standby
mode, press and hold the Call/Enter/Setup button to enter
the Weather mode programming.
2. Display will show WX Alert icon and flashing matrix will
display WX ALERT ON or OFF.
3. Press Channel Up/Down button to select ON or OFF.
4. Press Call/Enter/Setup button to save this entry and move
to the next setup programming mode.
Weather (WX) Mode Programming
MEMSAMEATIS VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
CIU
WX Alert On/Off
MEMSAMEATIS VOX LOMEDHI
VHF
T
R
A
B
GMRS
X
CIU
Weather Alert Standby
VHF Marine Radio Protocols
Operating Your Radio
26
English
Weather Mode Programming
IntroductionVHF Marine Radio Protocols
Operating Your Radio
To Set WX Auto Search (SCAN) On or Off:
WX auto search setup is only shown if WX Alert is set to ON.
1. Display will show Weather icon and the matrix will display
WX SCAN with ON or OFF flashing.
2. Press Channel Up/Down button to select ON or OFF.
3. Press the Call/Enter/Setup button to save entry.
You have now ended the WX Setup programming mode
and will enter the WX Alert Standby mode.
NOTE
When WX Auto Search (SCAN) is set to On, weather
channel scanning will start automatically and scan all
available weather channels. When the user-selected
weather channel falls below the preset squelch level, the
weather channel will change to a new weather channel
under the following conditions
:
WX Alert is engaged.
WX received signal level falls below a preset
squelch or the user-selected weather channel
and
radio is in WX Standby OR
radio is in VHF Standby and there is no
channel activity.
WX Alert is detected on another weather
channel.
Standby/Receive and Transmit
Marine Standby and Receive (Rx) Mode
Marine Standby mode is the default mode for the radio whenever it is turned on.
From this mode, you can change current settings by becoming familiar with the
different key functions in Marine Standby mode. While in Marine Standby mode, the
user will be able to transmit by pressing the Push to Talk (Talk) button. Signals in
Receive (Rx) mode will be received on the selected channel(s), and alerts broadcast
by NOAA will activate the corresponding NOAA weather alert channels in your radio.
NOTE
Coast Guard alerts are broadcast on Channel 16. You must have the WX Alert
turned On to receive NOAA weather alerts. While in Marine Standby mode, you
will receive any messages sent on the channel to which you are tuned.
MEMSAMEATIS VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
CIU
WX Auto Search (SCAN)
27
Nothing Comes Close to a Cobra
®
500_VHF_Body_v8_MRHH330_ENG_Body 3/26/13 11:13 AM Page 26
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra MR HH500 FLT BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MR HH500 FLT BT in the language / languages: English as an attachment in your email.

The manual is 4,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info