538275

Cobra MR HH450 DUAL Manual

21
Zoom out
Zoom in
Previous page
1/44
Next page
Operating Your Radio
37
Nothing Comes Close to a Cobra
®
36
English
Operating Your Radio
Weather Mode Programming
To Set SAME FIPS Code Programming:
1. From Weather Standby Mode, press CALL/ENT/SETUP key
until the display matrix shows SELECT ALERT: and WX,
SAME, or OFF will be flashing.
2. Press Channel Up/Down buttons to select SAME.
The first memory location "A" will be displayed. Up to 10
FIPS codes can be entered A - J.
3. Press and release the CALL/ENT/SETUP button and the first
FIPS memory A will be displayed. Use the Channel Up/Down
buttons to select the FIPS memory location A-J.
4. Press the Call/Enter/Setup button to enter geographic
weather locations as identified by FIPS (Federal Information
Processing System) area in the United States.
NOTE
FIPS codes identify geographic areas in the United
States as shown on the Internet website:
http://www.nws.noaa.gov/nwr/indexnw.htm.
5. The display will show “ ------,” or last entered FIPS
code. One (1) digit in display will be flashing.
6. Press Channel Up/Down button to select first digit.
7. Press and release Call/Enter/Setup button to advance to
next digit code. Press and release MEM/ESC button to
back up. Repeating, press and release of the MEM/ESC
button, will back up to the top level.
8. Continue steps 5 to 7 until all six (6) digits are entered.
9. Press the Call/Enter/Setup button to save the entered digits.
Weather Mode Programming
Call/Enter/Setup Button
MEMSAMEATIS VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
CIU
Select Weather Alert
To Set SAME FIPS Code Programming continued:
10. Use the Channel Up/Down buttons to select:
• OFF - entered FIPS code is not active or,
• ON - entered FIPS code is active.
11. Press the Call/Enter/Setup button to save the memory.
12. Repeat steps 3 through 10 to enter up to 10 FIPS codes
in memory.
13. When all of the codes are entered, use the Channel
Up/Down buttons to move to memory K.
14. Press the Call/Enter/Setup button and select:
• ON - all entered FIPS codes are set active,
• OFF - all entered FIPS codes are set inactive, or
• OK - all entered FIPS codes are correctly entered,
some On and some Off.
15. At least one FIPS code must be entered and made active
(ON) or the SAME mode is disabled. The radio will warn
you if no FIPS codes are on.
16. Press the Call/Enter/Setup button to exit back to
weather standy.
MEMSAMEATIS VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
CIU
Enter FIPS Code
MEMSAMEATIS VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
CIU
Code Entered
MEMSAMEATIS VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
CIU
All On
MEMSAMEATIS VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
CIU
SAME Disabled
MRHH450DUAL_MANL_ENG_MRHH330_ENG_Body 1/24/14 11:27 AM Page 36
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra MR HH450 DUAL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MR HH450 DUAL in the language / languages: English as an attachment in your email.

The manual is 6,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info