538275
16
Zoom out
Zoom in
Previous page
1/44
Next page
VHF Marine Radio Protocols
27
Nothing Comes Close to a Cobra
®
VHF Mode Programming
Setup Mode Programming
The following series of procedures is designed to allow you
to set the programmable features of your radio. Correctly
following these steps results in a minimal amount of radio
setup programming time.
During setup programming, the matrix display will show text
describing the programming action you are now performing.
NOTE
When in any of the Setup modes (Marine (VHF), GMRS
or Weather), if you stop programming for longer than
15 seconds, your entry will be saved and the radio will
go back to Standby mode. While in the Setup mode,
you will not receive any signal reception except when
setting squelch.
Programming these features will allow you to customize
certain features of this radio to enhance your “On-Water”
radio use.
Start from Marine Standby mode to begin Marine (VHF)
Setup programming. Press and hold the Call/Enter/Setup
button for two (2) seconds to enter the programming mode.
The mode programming follows this sequence:
Squelch Level Set
UIC Channel Map
VOX On/Off
Vox Sensitivity Level Set (this menu setting will be
present when VOX is set to ON)
Call Alert Tone/Vibrate Set
Call Alert Tone Set
Roger Beep On/Off
Key Tone On/Off
Rewind On/Off
Priority 16 On/Off
Marine (VHF) Mode Programming
VHF Marine Radio Protocols
26
English
Getting Started
High/Medium/Low (H-M-L) Power Button
Your radio can transmit selectively at 1, 3 or 6 (or highest
allowed ERP setting in GMRS mode) watts of power. Cobra
suggests you maintain the low power setting for short-range
communications. You will conserve battery life and avoid
overpowering nearby stations with a low power setting signal.
Use the high power setting for long-range communications or
when you do not receive a response to a signal sent at 1 watt.
To Toggle Between H-M-L Power Modes:
Press and release the H-M-L Power button. The LCD
will show which mode is in effect. Some channels are
restricted for a maximum use of 1 watt. Your radio will
automatically set the power to Low Power mode
when you select those channels.
NOTE
Some channels, frequency bands and countries of use
might not be able to operate in High Power mode and
some channels are receive only.
Call/Enter/Setup Button
The Call/Enter/Setup button has multiple functions. It is
generally used in the following ways:
Press and release to transmit your unique Call Tone signal
to another radio.
Press and hold to enter any Setup menu.
Functions as an Enter button when making a selection
in any Setup menu.
H-M-L Power Button
Call/Enter/Setup Button
Operating Your Radio
Operating Your Radio
MEMSAME
ATIS VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
CIU
Marine Standby Mode
Channel 16/9 Button
Channel 16/9 mode gives you quick access to calling
Channel 16 and Channel 9 from any operational mode.
To Switch to Channel 16 or Channel 9:
1. Press the Channel 16/9 button to change to
Channel 16.
2. Press the Channel 16/9 button again to change to
Channel 9.
3. Press the Channel 16/9 button a third time and
return to the last used channel.
SAMATIS VOX LOMEDHI
T
R
A
B
X
CIU
SAMATIS VOX LOMEDHI
T
R
A
B
X
CIU
Channel 16 or Channel 9
MRHH450DUAL_MANL_ENG_MRHH330_ENG_Body 1/24/14 11:27 AM Page 26
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra MR HH450 DUAL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MR HH450 DUAL in the language / languages: English as an attachment in your email.

The manual is 6,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info