538295
11
Zoom out
Zoom in
Previous page
1/34
Next page
VHF Marine Radio Protocols
17
Nothing Comes Close to a Cobra
®
Setup Mode Programming
Setup Mode Programming
The following series of procedures is designed to allow you
to set the programmable features of your radio. Correctly
following these steps results in a minimal amount of radio
setup programming time.
During setup programming, the matrix display will show text
describing the programming action you are now performing.
NOTE
When in the Setup mode, if you stop programming for
longer than 15 seconds,
your entry will be saved and
the radio will go back to the Marine Standby mode.
When you return to Setup mode and continue
programming you will see the last “value” displayed.
While in the Setup mode, you will not receive any
signal reception except when setting squelch.
Programming these features will allow you to customize
certain features of this radio to enhance your “On-Water”
radio use.
Start from Marine Standby mode to begin Marine (VHF)
Setup programming. STANDBY will be displayed on the
matrix. Press and hold the Call/Enter/Setup button for two
(2) seconds to enter the programming mode.
The mode programming follows this sequence:
Squelch Level Set
UIC Channel Map
Tone Alert On/Off
Call Tone Select
Roger Beep On/Off
Key Tone On/Off
Marine (VHF) Mode Programming
VHF Marine Radio Protocols
16
English
Getting Started
High/Medium/Low (H-M-L) Power Button
Your radio can transmit selectively at 1, 3 or 6 watts of
power. Cobra suggests you maintain the low power setting
for short-range communications. You will conserve battery
life and avoid overpowering nearby stations with a low power
setting signal. Use the high power setting for long-range
communications or when you do not receive a response to
a signal sent at 1 watt.
To Toggle Between H-M-L Power Modes:
Press the H-M-L Power button. The LCD will show
which mode is in effect. Some channels are restricted
for a maximum use of 1 watt. Your radio will
automatically set the power to Low Power mode
when you select those channels.
NOTE
Some channels, frequency bands and countries of use
might not be able to operate in High Power mode.
Call/Enter/Setup Button
NOTE
A few channels are Receive only and will not transmit
in these channels.
The Call/Enter/Setup button has multiple functions. It is
generally used in the following ways:
Press and release to transmit your unique Call Tone signal
to another radio.
Press and hold to enter any Setup menu.
Functions as an Enter button when making a selection
in any Setup menu.
WX
H M L
SC
EM
H-M-L Power Button
MEM
ENT SETUP
CALL
Call/Enter/Setup Button
Operating Your Radio
Operating Your Radio
MEMSAMEATIS VOX
LO MEDHI
VHF
T
R
A
B
GMRS
X
CIU
Marine Standby Mode
MRHH350W_FLT_MANL_ENG_MRHH330_ENG_Body 10/30/13 2:39 PM Page 16
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra MR HH350W FLT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MR HH350W FLT in the language / languages: English as an attachment in your email.

The manual is 4,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info