538294

Cobra MR HH350 FLT Manual

18
Zoom out
Zoom in
Previous page
1/25
Next page
Transmit power output
Your radio can Transmit selectively at one or five watts of
power. Cobra
®
suggests you maintain the low power setting
for short-range communications, to conserve battery life
and to avoid overpowering nearby stations with your signal.
Use the high power setting for long-range communications
or when you do not receive a response
to a signal sent at one watt.
To toggle between the high and low power modes:
1.
Press the High/Low Power button. The LCD will show
which mode is in effect.
Some channels are restricted to use at a maximum of
one watt. Your radio will automatically set the power
to Low Power mode when you select those channels.
While using the U.S.A. channel map, if, in an emergency,
you need to increase the output power on Channel 13 and
Channel 67 for your signal to be heard, you can override
the Low Power mode by pressing and holding the High/
Low Power button.
Backlight
The LCD will be illuminated by the Backlight as long as any key is pressed and will
remain on for five seconds after the button is released.
If you need to turn on the backlight
without disturbing any settings:
1.
Press the Backlight/Key Lock button. The backlight will
remain on for 10 seconds.
If the backlight is
on, a press of the Backlight/Key Lock
button will turn it off.
31
Nothing comes close to a Cobra
®
Getting Started
Intro Operation Customer
Assistance
Warranty
Notice
S
econdary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio
L
ow Power Mode
High Power Mode
High/Low Power Button
Backlight/Key Lock Button
30
English
Getting Started
U.S.A./International/Canada channel maps
Three sets of VHF Channel Maps have been established for marine use in the
U.S.A., Canada and the rest of the world (International). Most of the channels are
the same for all three maps, but there are definite differences (see table on pages
14 through 21). Your radio has all three maps built into it and will operate correctly
in whichever area you choose.
To set your radio for the area
in which you will be using it:
1.
From Standby mode, press and hold the Weather/UIC
button for two seconds. The radio will shift one channel
map and the Active Channel Map icon on
the LCD will show the change on the LCD.
Repeat step one to shift to the next channel map(s).
Channels
Your radio will receive and transmit VHF signals
on the Channel indicated on the LCD. You can change
the Channel at any time using the Channel Up and
Channel Down buttons.
To change channels:
1.
Press the Channel Up or Channel Down button.
You are on Channel 88, pressing the
Channel Up
button will advance to Channel 1. If you are on
Channel 1, pressing the Channel Down button
will advance to Channel 88.
You can hold the
Channel Up or Channel Down
button for fast advance.
The beep sound will occur only at the first press
of the button and not during fast advance.
If the new channel selected is restricted to low power,
the radio will automatically switch to
Low Power mode
and the Low Power icon will appear on the LCD.
If the radio is in the
Key Lock mode, the channel will not
change and the three beep error signal will sound.
Intro Operation Customer
Assistance
Warranty
Notice
S
econdary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio
Weather/UIC Button
Channel Up/Down Buttons
Currently On Channel 88
Active Channel Map Icon
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra MR HH350 FLT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MR HH350 FLT in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info