Manual Cobra MR HH200 VP (page 15 of 23) (English)

538290

Zoom out

Zoom in

1/23

Nothing comes close to a Cobra

English

Wrist Strap, Belt Clip, Spkr/Mic

Jack And Waterproof Pouch

Installation Installation

Batteries And Charger Jack

Wrist Strap, Belt Clip, Spkr/Mic Jack And Waterproof Pouch

•

The radio is shipped with a Wrist Strap, Belt Clip and Waterproof Pouch in the

package. The Speaker/Microphone Jack can be used with additional accessories.

Contact your local Cobra

dealer or Cobra

directly for optional accessories.

Wrist Strap

Your radio comes with the Wrist Strap already

attached. It can be easily removed if you choose

not to use it.

Belt Clip

Use the Belt Clip to carry your radio around with

you. Simply squeeze the clip and place it where

you prefer.

External Speaker/Microphone Jack

Your radio can be fitted with an optional External Speaker/Microphone

(not included), freeing your hands for other tasks. Contact your local Cobra

dealer or Cobra

directly for optional accessories.

To Attach The External Speaker/Microphone:

1. Open the speaker/microphone tab on top

of the radio.

2. Insert the plug into the speaker/microphone jack.

Waterproof Pouch

Use the included Waterproof Pouch to not only keep your radio dry,

but also dust and dirt free.

To Enclose The Radio In The Waterproof Pouch:

1. With the CobraMarine

™

logo facing up,

slip radio, face up, into opening under

Velcro

flap at the bottom of the

waterproof pouch.

2. Turn pouch and radio over so that the

CobraMarine

™

logo is facing down.

3. Roll bottom of pouch (between Velcro

pieces) towards upper piece of Velcro

4. Secure bottom piece of Velcro

upper piece of Velcro

Batteries And Charger Jack

•

Your radio includes four (4) rechargeable NiCD (Nickel-Cadmium) Batteries

(part No. NiCB) and a wall mount charger (part No. WWC) in the package.

Your wall charger is capable of recharging one (1) radio with batteries

installed in battery compartment.

You should fully charge the included rechargeable NiCD batteries before

using your radio for the first time.

Installing The Batteries

To Install Or Replace Batteries:

1. Remove belt clip by releasing belt clip latch

and sliding clip down.

2. Pull down on the battery door latch to remove

the battery compartment cover.

3. Insert the rechargeable NiCD batteries

(part No. NiCB) according to polarity markings.

4. Replace battery compartment cover and belt clip.

NOTE

Your radio can also be operated with four (4)

standard AAA alkaline batteries. Always use

high quality alkaline batteries. Position batteries

according to polarity markings.

NOTE

Contact your local Cobra

dealer or Cobra

directly for optional accessories.

WARNING

Only the rechargeable NiCD batteries

(part No. NiCB) can be recharged.

Remove Belt Clip

Remove Battery Cover

Insert Four (4) Batteries

Belt Clip

Speaker/Microphone Tab

Waterproof Pouch

Wrist Strap

200VP-Eng 12/3/03 5:41 PM Page 24

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MR HH200 VP in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cobra MR HH200 VP Manual

Product: