538285
25
Zoom out
Zoom in
Previous page
1/40
Next page
2. Choose one (1) of the following:
To Send An Automatic Distress Call:
Press and hold the Distress button.
Include a Nature of Distress Message with Distress Call:
a. Press and release the Distress button.
b. Press the Channel Up/Down buttons to manually select
from the list of pre-programmed Nature of Distress
calls — UNDEFINE, FIRE, FLOODING, GROUNDIN,
COLLISIO, MORE.
c. Press and hold the Distress button for three (3)
seconds to transmit the distress signal.
Abort The Distress Call Process:
If the Distress button is pressed by mistake or to
discontinue resending an automatic distress message:
a. Press the Channel Up/Down buttons to move the
arrow to EXIT.
b. Press the Distress button to return to Standby mode.
NOTE
You may also press the WX/ESC (escape) button to
return to the Standby mode.
The Distress alarm sounds to confirm that the message is
transmitted. At the end of the transmission, the radio
maintains a watch on Channel 16 and Channel 70 for an
acknowledgement. Press any button to turn Off the alarm
and return to Standby mode.
If an acknowledgement is received, the Distress alarm
sounds again and the responding party’s MMSI number
displays on the LCD.
If no acknowledgement is received, the radio resends the
message at approximately four (4) minute intervals until an
acknowledgement is received or the Distress call is aborted.
Digital Select Calling (DSC)
Operation
45
Distress
Acknowledgement
Operating Your Radio
Distress Waiting
Manual
Distress Button
Position Entry Screen
Exit
Transmit USA High
Nothing Comes Close to a Cobra
®
44
English
Digital Select Calling (DSC)
Operation
DSC Operation
Sending DSC calls is done from menus similar to the Settings menu. Whereas
entering the Settings menu required a press and hold of the Call/Set button,
the sending menus appear with a press of the Distress button.
All received DSC calls will sound one (1) or another of the alarms to alert you to them.
See pages 34 through 35 for descriptions of the different alarms. Pressing any button
will turn Off the alarm while maintaining the received call information on the LCD.
Sending Distress Calls
Sending and receiving distress calls and acknowledgements on Channel 70 can be a
lifesaver for mariners.
NOTE
The DSC call will:
Sound the distress alarm at all receiving stations.
Informs receiving stations of the sender’s identity (MMSI).
Informs receiving stations of the nature of the emergency.
Informs receiving stations of sending position when a GPS device is
connected or a position is manually entered.
DSC operation does not provide receiving stations with information like number of
persons aboard or injuries. This specific information must be communicated by voice
on Channel 16 to the station that acknowledges a DSC Distress call.
To Send a DSC Distress Call:
1. From Standby mode, lift the spring-loaded red door on
the transceiver and press the Distress button.
The Distress menu displays with an arrow
pointing to
SEND. There are three (3) choices:
Send a distress call automatically, with your position,
if you are connected to a GPS. Or send the call,
without your position, if not connected to a GPS.
Include a Nature of Distress message with the distress
call.
Abort the distress call process and return to
Standby mode.
Operating Your Radio
Distress Button
Send/Manual/Exit
F55D_Operation_Eng:8186-F55_Operation-Eng 12/8/10 8:25 AM Page 54
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra MR F55-D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MR F55-D in the language / languages: English as an attachment in your email.

The manual is 3,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info