538285

Cobra MR F55-D Manual

18
Zoom out
Zoom in
Previous page
1/40
Next page
Set-Up Routines
31
U.S.A./International/Canada Channel Maps
Three (3) sets of VHF Channel Maps have been established for marine use in the
U.S.A., Canada, and the rest of the world (International). Most of the channels
are the same for all three (3) maps, but there are definite differences (see table
on pages 14 through 23). Your radio has all three (3) maps built into it and will
operate correctly in whichever area you choose.
To Set Your Radio For The Area In Which
You Will Be Using It:
1. From Standby mode, press and hold the Weather/UIC
button. The radio will shift one (1) channel map and the
active channel map will show on the top line of the LCD.
2. Repeat step 1 to shift to the next channel map(s)
in the sequence
USA, INT (International),
CAN (Canada) then back to USA.
The radio will return to Standby mode each time the
button is released.
Operating Your Radio
Weather/UIC Button
Active Channel Map
Nothing Comes Close to a Cobra
®
30
English
Set-Up Routines
Confirmation Tone (Key Tone)
The Confirmation Tone sounds when your CobraMarine VHF radio is turned On
and to confirm all button presses except for the Talk button. If you would prefer
not to hear the Confirmation Tone, you can turn it Off and On as you choose.
To Turn The Confirmation Tone On Or Off:
1. Enter the Settings menu and scroll to
KEY TONE
with the Up/Down buttons.
2. Press the Call/Set button and observe the current
confirmation tone setting —
ON or OFF.
3. Use the Up/Down buttons to switch to the setting
you want.
4. Press the Call/Set button to select the setting.
5. Use the Up/Down buttons to scroll to
EXIT.
6. Press the Call/Set button to return to Standby.
Time Offset
All VHF, DSC, and GPS activities use a 24-hour clock and Coordinated Universal
Time (UTC) which was formerly known as Greenwich Mean Time (GMT). Time Offset
uses your connected GPS to gather time inputs. For time inputs to be converted to
local time, you need to enter the hour offset of your local time zone from Greenwich.
(See world city time zone chart on page 24.)
To Change The Time Offset:
1. Enter the Settings menu and scroll to
TIME OFFST
(time offset) with the Up/Down buttons.
2. Press the Call/Set button and observe the current setting.
3. Use the Up/Down buttons to change to the setting for
your local time zone.
4. Press the Call/Set button to select the setting.
5. Use the Up/Down buttons to scroll to
EXIT.
6. Press the Call/Set button to return to Standby.
NOTE
If you leave the time offset at zero (0), the LCD will show
the time as UTC. If you enter the hour offset for your
time zone, the LCD will show the local time. In either
event, DSC messages will always be based on UTC.
Operating Your Radio
On/Off
Set Time
Time Offset
Key Tone
F55D_Operation_Eng:8186-F55_Operation-Eng 12/8/10 8:25 AM Page 40
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra MR F55-D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra MR F55-D in the language / languages: English as an attachment in your email.

The manual is 3,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info