Manual Cobra M51SPH (page 11 of 20) (English)

634398

Zoom out

Zoom in

1/20

- 11 -

TWO: Resetting for side-discharge mowing

1. Lift the rear cover and remove the grass catcher.

2. Mount the discharge channel.

3. Lift the sideward flap for side discharge (Fig.7D)

4. Mount the discharge guide for side discharge on the support pin of the sideward flap. (Fig.7E/Fig.7F)

5. Lower the sideward flap- the flap lies on the discharge channel. (Fig.7G)

WARNING: Only when the engine and the blade are at standstill!

Fig. 7D Fig. 7E

Fig. 7F Fig. 7G

THREE: Mowing with the grass catcher

For mowing with the grass catcher, remove the mulching wedge and side discharge channel from the side discharge chute and

mount the grass catcher.

1. Removing the mulching wedge:

-Lift rear cover and remove the mulching wedge.

2. Removing the side discharge channel for side discharge:

-Lift sideward flap and remove side discharge channel.

-The sideward flap automatically closes the discharge opening on the housing by means of spring force.

-Regularly clean the sideward flap and discharge opening form grass and stuck on dirt.

3. Mount the grass catch bag:

-To fit: Raise the rear cover and hitch the grass catcher on rear of the mower.

-To remove: Grasp and lift the rear cover, remove the grass catcher.

WARNING: only with a stopped engine and standstill cutter blade.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cobra M51SPH in the language / languages: English as an attachment in your email.

The manual is 1,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cobra M51SPH Manual

Product: