Manual Cobra M40B (page 9 of 16) (English)

634276

Zoom out

Zoom in

1/16

7.2 TO START ENGINE AND ENGAGE BLADE

-Always check the engine oil level before starting. Refer to the engine manual.

1. The unit is equipped with a rubber boot over the end of the spark plug, make certain the metal loop on the end of the spark plug

wire (inside the rubber boot) is fastened securely over the metal tip on the spark plug.

2. When starting cool, press the primer bulb 3-5 times before starting the engine. (Fig.8A)

3. Cold engine starting: Turn the throttle choke lever to “ ” position, full speed. When starting a warm engine, turn the throttle

choke lever to the middle position. (Fig.8B)

4. Standing behind the mower, grasp the brake control handle and hold it against the upper handle as shown in Fig.8C.

5. Hold the starter handle as shown Fig.8C and pull up rapidly. Return it slowly to the rope guide bolt after engine starts.

Release the brake control handle to stop the engine and blade.

Fig.8A Fig.8B Fig. 8C

Start the engine carefully according to instructions and with feet well away from the blade.

Do not tilt the lawn mower when starting the engine. Start the mower on a level surface, free of high grass or obstacles.

Keep hands and feet away from the rotating parts. Do not start the engine when standing in front of the discharge opening.

7.3 OPERATION PROCEDURES

During operation, tightly hold the stop control handle with both hands.

Note: During operation, when the brake control handle is released, the engine will stop and thus stopping the lawnmower

from operating.

7.4 TO STOP ENGINE

CAUTION: The blade continues to rotate for a few seconds after the engine is shut off.

1. Release the brake control handle to stop the engine and blade.

2. Disconnect and ground the spark plug wire as instructed in the separate engine manual to prevent accidental starting while

equipment is unattended.

Fig.9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cobra M40B in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cobra M40B Manual

Product: