634448
6
Zoom out
Zoom in
Previous page
1/10
Next page
Fig. 3
Fig. 4
Special instructions for splitting logs:
Preparations:
The
lo
gs t
o
be split should be cut to the maximum dimensions
(520 mm long, 50 – 250 mm). Ensure also that the logs are
cut straight and square.
Place the log properly on the log splitter, so as not to cause
any risk of stumbling or falling to the operator.
Bleeding
Open the bl
eed screw 3 – 4 complete turns – Fig. 5.
Close the bleed screw again when you are finished splitting
logs.
Fig. 5
Bleed screw
tighten
open (bleeding)
Splitting logs:
¾ Alw
a
ys p
lac
e the logs lengthwise and flat on the main
frame of the log splitter. The log must be enclosed by the
log guide plates
. Fig. 6
Fig. 6
¾ Never pl
ace the log on the frame at an angle. Fig. 7
Fig. 7
¾ Always e
nsure that the splitting wedge and the log ram
contact the ends of the log at right-angles.
¾ Never try to split two logs at once.
¾ Never try to remove or replace the log during the splitting
process.
5
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra LS520H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra LS520H in the language / languages: English as an attachment in your email.

The manual is 17,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info