634473

Cobra LRH270K Manual

33
Zoom out
Zoom in
Previous page
1/47
Next page
Installing The China
Never attempt to install, replace,
or adjust the chain with the
engine running.
The saw chain is very sharp. Wear
gloves to protect your hands when
handling.
For longest chain life, let new or
replacement chain loops soak in oil
overnight before installation.
1. Using the small end of the plug wrench,
remove the sprocket cover nut (turn
counterclockwise to remove) and remove
the sprocket cover. See Figure 16.
2. Place the guide bar over the guide bar
adjustment stud on the cutting head
assembly. Align the chain tensioning pin
with the hole in the guide bar. See Figure
17.
3. Install the chain loop over the drive
links within the guide bar groove , and
then align the chain over the drive
sprocket . Make sure
the cutter are properly
oriented as shown in
Figure 18. If chain
installation is difficult
or if the chain appears
too tight, refer to the
section “Adjusting the
China” on the next
page.
4. Install the sprocket cover over the bar
stud. Using finger-pressure only, install
the sprocket cover nut.
5. Refer to the next page for chain
adjusting procedures.
Failure to align the guide bar and chain
tensioning pin can cause serious
damage to the sprocket cover, guide
bar, chain tensioning pin and cutting
head assembly.
Never operate the pole pruner Without
the sprocket cover installed.
32
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra LRH270K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra LRH270K in the language / languages: English as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info