Manual Cobra LRH270K (page 6 of 47) (English)

634473

Zoom out

Zoom in

1/47

1.Place the powerhead on a clean, flat

surface, spark plug facing up.

2.Use the 4mm allen wrench to loosen

the tube clamp as shown in figure 4.

3.Slip off the protective covers from

two ends of bube.

Do not force the lower tube info

the powerhead! Excessive force

can damage the components.

4.Push the lower tube towards the tube

clamp and rotate it by hand to check

that the mainshaft splines engage the

powerhead, See Figure 5

5.Insert the lower tube into the tube

clamp until it bottoms and align the

positioning holes on the tube and

clamp, then install the screw.

6.Fasten the clamp securely with 2

clamp screws.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cobra LRH270K in the language / languages: English as an attachment in your email.

The manual is 3,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cobra LRH270K Manual

Product: