538203
6
Zoom out
Zoom in
Previous page
1/15
Next page
3
O P E R A T I O N S E T T I N G S
3
O P E R A T I O N S E T T I N G S
11
10
What to Remember While
Using IntelliMute
®
IntelliMute
®
works with both City and Auto
Mute modes.
Whenever your engine revs are below the
activation point, the dot next to the large
character on the right side of the display
will remain lit. Above the activation point,
the dot will blink twice every 2 seconds.
If, for any reason, the unit stops sensing
your engine's revs, IntelliMute
®
will indicate
an error and automatically turn off.
The rev point you set will be stored in the
unit's memory when power is turned off, and
recalled each time the power is turned on.
The rev point must be reset if you use
your detector in a different vehicle.
Important: When initially choosing your
IntelliMute
®
activation point, a setting
of approximately 300 to 600 RPMs above
idle is recommended. You can reset the
activation point at any time to fit your
individual preferences and driving style.
K Ka V S
X K Ka V S
X K Ka V S
X K Ka V S
X K Ka V S
K Ka V S
X K Ka V
K Ka V S
X K Ka V S
X K K V S
X K Ka V
K Ka V
1.
3.
2.
Tone
1 beep
Visual Display
appears
Procedure
Press and hold the
IntelliMute
®
button for 2 seconds.
Tone
2 beeps
Visual Display
none
Procedure
Rev your engine to
the level you wish
to set. Rev the engine
slightly above idle
and hold revs steady
for 2 seconds.
Tone
none
Visual Display
three bars flash in
succession
Tone
1 beep
Visual Display
appears
Tone
3 beeps
Visual Display
all three bars flash
three times
Procedure
At the desired rev level,
press and release the
IntelliMute
®
button.
Setting the IntelliMute
®
Activation Point
Your detector must be installed in your
vehicle.
Caution: Do not attempt to set the rev
point while driving. Your vehicle should
be parked and idling.
IntelliMute
®
must be turned on.
You will hear a series of beeps
as you follow these steps:
1
2
3
NOTE: If the unit is unable to
sense usable pulses within three
seconds, IntelliMute
®
will indicate
an error and automatically turn off.
NOTE: If you do not set a rev point
within 20 seconds of beginning these
steps,IntelliMute
®
will indicate an
error and automatically turn off.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra ESD787 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra ESD787 in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info