Manual Cobra ESD7100 (page 10 of 11) (English)

538200

Zoom out

Zoom in

1/11

Warranty And Product Service

Nothing Comes Close to a Cobra

Maintenance And Specifications

English

Maintenance

•

Maintenance Of Your Radar Detector

Your detector is designed and built to give you years of trouble-free

performance without the need for service. No routine Maintenance is required.

If your unit does not appear to be operating properly, please follow these

troubleshooting steps:

■ Make sure the power cord is properly connected.

■ Make sure the socket of your vehicle’s cigarette lighter is clean

and free of corrosion.

■ Make sure the power cord’s cigarette lighter adapter is firmly

seated in your cigarette lighter.

■ Check the power cord fuse. (Unscrew the ribbed end cap

of the cigarette lighter adapter and examine the fuse. If required,

replace it with a 2-amp fuse only.)

Specifications

•

Band And Frequencies

Band Frequencies

X Band 10.525 ± 0.050 GHz

K Band 24.125 ± 0.125 GHz

Safety Alert 24.070 ± 0.010 GHz

Traffic Warning 24.110 ± 0.010 GHz

System 24.190 ± 0.010 GHz

24.230 ± 0.010 GHz

Ka Band 34.700 ± 1.300 GHz

Laser 910 ± 50 nm

Unit Dimensions And Weight

Dimensions* Weight*

⁄4" x 2

⁄4" x 3

⁄8" 4.26 oz.

(33 mm x 70 mm x 98 mm) (121 g)

* Dimensions and weight measurements are approximate.

This radar detector is covered by one or more of the following U.S. patents: 5,497,148; 5,594,432;

5,612,685; 6,078,279; 6,094,148. Additional patents may be listed inside the product or pending.

Limited 1-Year Warranty

•

For Products Purchased In The U.S.A.

Cobra Electronics Corporation warrants that its Cobra 9 Band Radar/Laser Detectors, and the

component parts thereof, will be free of defects in workmanship and materials for period of one (1)

year from the date of first consumer purchase. This warranty may be enforced by the first consumer

purchaser, provided that the product is utilized within the U.S.A.

Cobra will, without charge, repair or replace, at its option, defective 9 Band Radar/Laser Detectors,

products or component parts upon delivery to the Cobra Factory Service Department, accompanied

by proof of the date of first consumer purchase, such as a duplicated copy of a sales receipt.

You must pay any initial shipping charges required to ship the product for warranty service, but the

return charges will be at Cobra’s expense, if the product is repaired or replaced under warranty.

This warranty gives you specific rights, and you may also have other rights which vary from state to state.

Exclusions: This limited warranty does not apply: 1) To any product damaged by accident.

2) In the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs.

3) If the serial number has been altered, defaced or removed. 4) If the owner of the product resides

outside the U.S.A.

All implied warranties, including warranties of merchantability and fitness for a particular purpose

are limited in duration to the length of this warranty.

Cobra shall not be liable for any incidental, consequential or other damages; including,

without limitation, damages resulting from loss of use or cost of installation.

Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion

or limitation of incidental or consequential damages, so the above limitations may not apply to you.

Product Service

•

If you have any questions about operation or installing your new Cobra product, or if you are

missing parts…

Please call Cobra first! DO NOT RETURN THIS PRODUCT TO THE STORE!

See customer assistance on page A1.

If you suspect that your unit requires service, please call 773-889-3087 BEFORE shipping

it to Cobra. This will ensure that you receive service as quickly as possible.

If you are asked to send your unit to the Cobra factory, please follow these steps: 1) Send the

complete unit, including power cord. (It is not necessary to include the mounting bracket.) 2) For

warranty repair, enclose some form of proof-of-purchase, such as a photocopy or carbon copy of

a sales receipt. If you send the original receipt, it cannot be returned. 3) Enclose a typed or clearly

written description of the problem you are having with your unit, plus the name and address where

you want the unit returned. 4) Pack the unit securely to prevent damage during transit. If possible,

use the original packing materials. 5) Ship prepaid and insured using a traceable carrier such as

United Parcel Service (UPS), Federal Express, or Priority mail with delivery confirmation. Ship to:

Cobra Factory Service, Cobra Electronics Corporation, 6500 West Cortland Street, Chicago, IL 60707

U.S.A. 6) Please allow three (3) to four (4) weeks before contacting us about the status of your

service. Call 773-889-3087 for assistance. If your unit is under warranty, it will either be repaired

or replaced upon receipt, depending on the model. If your unit is out of warranty, you will receive

a letter informing you of the repair or replacement charge.

our Detector

arranty

Customer Assistance

ESD7100_MANL_BODY.qxd:7000-Body 5/1/08 10:45 AM Page 14

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cobra ESD7100 in the language / languages: English as an attachment in your email.

The manual is 1,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cobra ESD7100 Manual

Product: