538198
9
Zoom out
Zoom in
Previous page
1/13
Next page
5
5
UNDERSTANDING RADAR & LASER
Radar Speed
Monitoring Systems
Three band frequencies have been approved
by the Federal Communications Commission
(FCC) for use by speed monitoring radar
equipment:
X band 10.525 GHz
K band 24.150 GHz
Ka band 33.400-36.00 GHz
Your ESD-6060 detects signals in all three
radar bands.
VG-2
VG-2 is a "detector detector" that works
by detecting low-level signals emitted by
most radar detectors. Your ESD-6060 does
not emit signals that can be detected by
VG-2, but does detect VG-2 signals and
will alert you when a device is in use
near your vehicle.
Safety Alert
®
Traffic
Warning System
FCC-approved Safety
Alert
®
transmitters emit
microwave radar signals that indicate the
presence of a safety-related concern.
Depending on the frequency of the signal
emitted, it can indicate a speeding
emergency vehicle or train, or a stationary
road hazard.
Because these microwave signals are within
the K band frequency, most conventional
radar detectors will detect Safety Alert
®
signals as standard K band radar. Your
ESD-6060, however, is designed to
differentiate between standard K band
and Safety Alert
®
signals, and give separate
alerts for each.
Safety Alert
®
technology is relatively new.
Safety Alert
®
transmitters can be found in
limited numbers in all 50 states, but the
number is growing. Depending on your
location, you may not receive these alerts
regularly and may often encounter
emergency vehicles, trains, and road
hazards without being alerted. As the
number of transmitters increases, these
alerts will become more common.
When you receive such an alert, please
watch for emergency vehicles ahead of you,
on cross streets, and behind you. If you see
an emergency vehicle approaching, please
pull over to the right side of the road and
allow it to pass.
13
12
Does weather have any affect
on LIDAR?
Yes. Rain, snow, smoke, fog, or airborne
dust particles will reduce the effective
range of LIDAR and can, if dense enough,
prevent its operation.
Can LIDAR operate through glass?
Yes. Newer LIDAR guns can obtain
readings through most types of glass.
However, the laser pulse also can be
received through glass to trigger an alarm
by your ESD-6060.
Can LIDAR operate while in motion?
No. Because LIDAR operates by line of sight,
the person using it cannot drive the vehicle,
aim, and operate the gun all at the same time
.
Is LIDAR legal to use?
Yes. It is legal in all 50 states.
Some common questions about LIDAR include:
UNDERSTANDING RADAR & LASER
LIDAR (laser)
The correct name for the technology that most
people refer to as laser is actually LIDAR,
which stands for Light Detection and Ranging.
LIDAR operates much like radar. Its signal
spreads out like a radar signal, though not as
quickly. Unlike radar, LIDAR must have a clear
line of sight to its target vehicle throughout
the entire measurement interval. Obstructions
such as sign posts, utility poles, tree branches,
etc., will prevent valid speed measurement.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra ESD-6060 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra ESD-6060 in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info