538271
6
Zoom out
Zoom in
Previous page
1/17
Next page
Customer Assistance WarrantyIntroduction
7
Operation
6
Using Your Radio
Auto Squelch/Maximum Range
Your microTALK
®
radio is equipped with Auto Squelch, which
automatically shuts off weak transmissions and unwanted noise
due to terrain and conditions. This slightly reduces the Maximum
Range at which signals can be heard.
You can turn off auto squelch to allow all signals to be
received and extend the maximum range of your radio.
To briefly turn off auto squelch:
Press the Light/Max Range button
for less than five (5) seconds.
If you hear two (2) beeps, you have turned
the maximum range extender on (see below).
To turn maximum range extender on:
Press and hold the Light/Max Range button
for at least five (5) seconds until you hear
two (2) beeps which indicates the maximum
range extender is on.
To turn maximum range extender off:
Press and release the Light/Max Range
button or change channels.
Lock Feature
The Lock feature locks the Channel, Mode, Hi•Low and Power
buttons to prevent accidental operation.
To turn the lock feature on or off:
Press and hold the Lock/Enter button for
two (2) seconds.
A double beep sound is used to confirm your
lock on or off request. When in Lock mode,
the Lock icon will be displayed.
Operation
Light/Max Range
LI 7300
Lock/Enter Button
Lock Mode
Speaker/Microphone/Charge Jack
Your microTALK
®
radio can be fitted with an external Speaker/Microphone,
freeing your hands for other tasks. This same jack also serves as the
connecting point for the wall charger/adapter.
To attach a speaker/microphone:
1. Open the speaker/microphone/charge
tab on top of your microTALK
®
radio.
2. Insert the plug into the speaker/
microphone/charge jack. (See page 5 for
power output settings while using speaker/
microphones.)
To connect a wall charger/adapter:
1. Open the speaker/microphone/charge
tab on top of your microTALK
®
radio.
2. Insert the wall charger/adapter plug
into the speaker/microphone/charge jack.
Rewind-Say-Again
The Rewind-Say-Again feature on your microTalk
®
radio can record
incoming or outgoing calls. Recorded calls will fill the memory
up to its 20-second capacity. As additional calls are recorded, the
oldest calls will be dropped from memory. To save recordings,
turn off the Rewind-Say-Again feature.
To turn on Rewind-Say-Again:
1. Press and hold the Rewind button until the
Rew icon illuminates.
The feature will remain on until turned off.
To turn off Rewind-Say-Again:
1. Press and hold the Rewind button until the
Rew icon is no longer illuminated.
Recording will be ended and the most recent 20
seconds of recording will be retained in memory.
To record incoming transmissions:
1. Turn on Rewind-Say-Again.
If Rewind-Say-Again is already on, incoming calls
will be recorded without further action on your part.
Speaker/Microphone/
Charge Jack
LI 7300
Rewind Button
Rewind Icon
Nothing Comes Close to a Cobra
®
CXR925_MANL.indd 6-7 4/23/13 4:14 PM
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra CXR 925 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra CXR 925 in the language / languages: English as an attachment in your email.

The manual is 3,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info