634435
8
Zoom out
Zoom in
Previous page
1/32
Next page
Operate the electric chain saw only in daylight or good artificial lighting.
The use of power equipment can be regulated. Remember to comply with legal
regulations which may differ from one location to another.
Do not use the machine if you are tired or ill. Also avoid use if you have consumed
alcohol or taken drugs. A lack of concentration can result in serious injury.
Wear close-fitting clothing, convenient and protect you from cuts. Always wear long
pants, sturdy and non-slip shoes, and protective equipment such as gloves, goggles,
a helmet with a visor and acoustic shield, etc.
Make sure the trigger switch is turned off before connecting the electric chainsaw
plug to power supply to avoid sudden and unexpected accidents.
Do not allow anyone to remain in the range of action of the electric chainsaw during
use. Keep people, children and animals away from work area. If it is group work, keep
sufficient distance between people and the machine.
Make sure that the handles are clean and dry. When the machine is running, always
firmly grip the front handle with your left hand and the rear handle with your right
hand.
Always work in a stable position, on balanced and firm ground. Do not work on slippery
or unstable ground. Never use a chainsaw up a ladder.
Hold the saw firmly with both hands. Put yourself in a position that allows you to
withstand the forces of kickback. Never let go of the chainsaw.
Always try to use the saw around the bumper spike of the machine to serve as a pivot point.
Always start sawing with the chain in motion.
Do not saw with the tip of the saw guide bar.
During cutting, some tension on wood may be released suddenly and cause splashes
or hazardous releases.
Never operate the electric chainsaw above shoulder height when cutting.
Never operate a damaged machine repaired poorly, poorly fitted or changed
arbitrarily.
Do not overload the machine. Always use the proper equipment for the job.
2.3 When using the saw
Do not cut with the tip of the guide bar.
Hold the saw with both hands.
9
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra CS40E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra CS40E in the language / languages: English as an attachment in your email.

The manual is 4,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info