538255
22
Zoom out
Zoom in
Previous page
1/38
Next page
Nothing Comes Close to a Cobra
®
Set-Up Routines
39
LCD Backlight
The LCD has a backlight lamp to make it visible in the dark.
This lamp can be adjusted for brightness or turned Off.
To Adjust The Backlight Level:
1. Enter the Settings menu and scroll to
LAMP ADJ
(lamp adjustment) with the Up/Down buttons.
2. Press the Call/Set button and observe the current
backlight setting
HIGH, MEDIUM, LOW or OFF.
3. Use the Up/Down buttons to switch to the setting you want.
4. Press the Call/Set button to select the backlight setting.
5. Use the Up/Down buttons to scroll to
EXIT.
6. Press the Call/Set button to return to the Settings menu.
When the backlight is turned On to any intensity,
the lamp will be lit whenever the radio is On.
LCD Contrast
The LCD backlight will not be visible in daylight, but the LCD Contrast
can be adjusted to make it easier to read in different light conditions.
To Change The Contrast:
1. Enter the Settings menu and scroll to
CONTRAST
with the Up/Down buttons.
2. Press the Call/Set button and observe the current
contrast setting a number between one (1) and 16.
3. Use the Up/Down buttons to change the number
up or down.
4. Press the Call/Set button to select a contrast level.
5. Use the Up/Down buttons to scroll to
EXIT.
6. Press the Call/Set button to return to the Settings menu.
Operating Your Radio
Lamp Adjustment
High/Medium/Low/Off
Contrast
Contrast Setting
Nothing Comes Close to a Cobra
®
38
English
Set-Up Routines
Set-Up Routines
Settings Menu
The Settings menu in the CobraMarine VHF radio allows you to turn On and Off
many of its features, to adjust other features to suit your preferences, and to enter
your user MMSI number.
To Enter The Settings Menu:
Press and hold the Call/Set button.
The Settings menu will appear on the LCD.
After entering the Settings menu, you can scroll
through it to make as many entries as you like.
Whenever the setting selection arrow appears in
a feature portion of the menu, it will point to the
setting that was in effect when you entered the menu.
When you are finished with changes, you can exit
the Settings menu and return to Standby mode.
To Exit The Settings Menu:
1. Use the Up/Down buttons to scroll down to
EXIT at the bottom of the menu.
2. With the arrow pointing to
EXIT, press the Call/Set
button to return the radio to Standby mode.
NOTE
Basic set-up routines are described here. For set-up
routines that apply specifically to a particular function,
they are included in the section for that function.
Operating Your Radio
Call/Set Button
Settings Menu
Exit
Up/Down Buttons
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra CJIC 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra CJIC 250 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cobra CJIC 250

Cobra CJIC 250 User Manual - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info