586734
11
Zoom out
Zoom in
Previous page
1/14
Next page
English
16 17
Adjusting Camera Settings
Adjusting Camera Settings
Your Dash Cam
Your Dash Cam
To Adjust General Settings
General Settings
Beep Sound
If you don’t want the device to beep on every button press, turn
this option OFF.
Idle Power Off
Automatically turns the unit off if no buttons are pressed within 1
or 5 minutes if no video is being recorded.
Date/Time
Use this to set the current time and date.
Date Format Sets the date format.
TV System Lets you choose between NTSC (United States) and PAL (Europe)
HDMI Output Lets you choose between 720P and 1080P on the HDMI Output.
Screen Flicker This sets the screen refresh rate. Options include 50 Hz and 60 Hz.
USB Function
If you want your camera to behave like a Mass Storage device
(ash drive) when connected to a computer, select MSDC. If you
want to use it as a webcam with your computer, select PCAM.
Screen Rotate Allows you to ip the screen vertically for upside-down operation.
Screen Saver
Allows you to set a timeout for the screen to go black when not in
use. Options include 1 minute and 3 minutes.
G-Sensor Level Sets the sensitivity of the G-Sensor, from 0 (off) to 4 (max)
Motion Detector Sets the sensitivity of the Motion sensor, from 0 (off) to 3 (max)
GPS Status
This allows you to view the raw data from the GPS satellites that
are available in your area.
Time Zone Select Set the time zone you’re currently in.
Restore Defaults Resets the system to its default settings.
Format SD-Card
If you want to completely erase all the movies and les on the SD-
card, select this option. Be careful; all your data will be lost.
SD-Card INFO See how much space remains on the SD Card.
FW Version Get the rmware version information.
NOTE: If you are currently recording video ( ) you’ll
need to stop recording with the OK button rst.
While in VIDEO or STILL PHOTO mode, press the
MENU button once to enter the menu selection
screen. Press the down arrow until General Settings
is highlighted, then press OK to conrm.
Press the UP and DOWN arrows to select the setting
you’d like to modify, then press the OK button to
conrm.
A window on the right edge of the screen will display
the available options. Use the UP and DOWN arrows
to make your selection, then press OK to conrm.
A list of the settings and their meanings are shown on the
next page.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra CD R 840E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra CD R 840E in the language / languages: English as an attachment in your email.

The manual is 2,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info