538232

Cobra BT200 Manual

11
Zoom out
Zoom in
Previous page
1/15
Next page
Introduction
17
Nothing Comes Close to a Cobra
®
English
Introduction
16
Operating Your Handset
Customizing the BT 200
NOTE
If corrections are needed before saving the entry, press the Left or Right
Arrow Function button to move the cursor to the character that is to be
changed and press the Delete Function button to remove that character.
Then scroll the list to select the correct character.
NOTE
A “double click” on the Delete Function button will remove the entire entry
and return the cursor to the initial position after Name.
To Edit an Existing Name or Phone Number:
1. Select Phonebook from the Menu function, scroll down to
name or number to be edited and press the Edit Function
button to arrive at the screen shown.
2. Use the Right and Left Arrow Function buttons to move
the cursor to the character(s) to be changed and proceed
as described for making corrections when entering a new
name or number.
3. Press the Save Function button to save the changes or
deletion and go back to the Phonebook function.
PA Output
If, during installation, you have connected the Cobra Bluetooth handset connection
cable to your vessel’s stereo AUX input, you can allow the handset
to be used as a public address microphone.
To Enable Use of Auxiliary Speakers:
1. Select PA Output from the Menu function to arrive at
the screen shown.
2. Press the On or Off Function button to toggle between
On and Off condition.
NOTE
An optional installation cable is necessary to use the PA feature.
Phonebook Entries
The Operation section described using a Phonebook entry to dial an outgoing call.
Both names and numbers can be stored in the Phonebook.
To Enter a New Name and Phone Number
1. Select Phonebook from the Menu function and scroll
the pointer down to Add New at the bottom of the list
to arrive at the screen shown.
2. Press the Enter or New Function button to advance
to the Phonebook Edit mode.
3. Press the Up or Down Arrow button to scroll the
alphanumeric list to the first character of the Name.
NOTE
The list consists of the letters A to Z followed by the
numbers 0 to 9 followed by +, “space,” *, and # and
it will wrap around from # to A.
NOTE
If only a number (without a name) is to be entered,
at step 3, press the Right Arrow Function button until
the cursor moves to the first character of the number
and jump to step 7.
4. When the first character appears above the cursor, press
the Enter or PTT button to save the character and move
the blinking cursor to the right.
5. Repeat step 4 until the entire name has been entered.
6. Continually press or press and hold the Right Arrow
Function button until the cursor moves to the first
character of the Number.
7. Enter the phone number in the same fashion as the name.
8. Press the Save Function button to save the entry and go
back to the Phonebook function.
Operating Your Handset
Customizing the BT 200
NAME :
NMB:
SAVE
DEL
Enter a New Name
and Phone Number
+
1 555 588 2300
JANE DOE
ADD NEW
EXIT
EDIT
49
50
NEW
Add New
ON OFF
PA OFF
Enable Use of
Auxiliary Speakers
NAME : BILL ANDERSON
NUMBER: +1 555 566 1234
SAVE
DEL
Phonebook Edit
BT200_MANL.qxp:10732 Cobra MR F300 BT 12/8/08 1:44 PM Page 16
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cobra BT200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cobra BT200 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info