497764

Cme Toptel TV 100 Manual

9
Zoom out
Zoom in
Previous page
1/36
Next page
7
FITTING THE BATTERIES
Before programming and using the remote control, fit the batteries.
The remote control requires 2 new AAA/LR03 batteries.
• Change the batteries if the light indicator starts to flash during use. The batteries are low.
• When you remove the batteries, fit the new ones within 5 minutes or you may have to reprogramme your
remote control.
• Make a note of the code for your TV on the adhesive label inside the battery cover in case you have to
reprogramme your remote control.
1. Switch on the TV.
2.
Look for the brand of the television you want to programme
in the code list and make a note of the corresponding
code alongside
(e.g. PHILIPS 0025)
.
3. Hold down the MUTE and ON/OFF keys together for 3
seconds until the light indicator starts to flash indicating
that the remote control is being programmed.
4. Release the keys. Within 12 seconds, enter the brand
code previously identified (
e.g. 0025
). The light indicator
flashes more quickly to indicate that the remote control
is ready for the search.
5. Point the remote control towards the TV. Press and slowly
release the ON/OFF key several times, stopping when
the TV goes off.
6. When the TV goes off, press the OK key to confirm.
Three flashes indicate that the operation has been
completed correctly.
The quickest and easiest way to programme the remote control is
by consulting the website www.cme.it.
HOW TO PROGRAMME THE REMOTE CONTROL
PHILIPS 0025
To display and make a note of the code memorized by means of the search,
follow the instructions described in the paragraph CURRENT CODE DISPLAY.
NB: THE LIGHT INDICATOR STOPS FLASHING
The remote control exits programming mode and the light indicator stops flashing:
• if no keys are pressed for 14 seconds
• if an invalid brand code is entered
• if the code search list is completed. In this case, consult the website www.cme.it
ADDITIONAL CHECK
Check that some of the other keys, corresponding to those on your original remote control, work correctly.
If the commands function incorrectly or erratically, you have probably entered a code for a similar remote
control but not the right one. In this case, repeat the search procedure starting from point 3, entering the
code previously used (e.g. 0025).
+
5 SEC.
+++
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cme Toptel TV 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cme Toptel TV 100 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info