Manual Cme Toptel 5 - learn (page 13 of 52) (English, German, French, Italian, Spanish)

497768

Zoom out

Zoom in

1/52

CURRENT CODE DISPLAY

NB: this operation cannot be interrupted and the remote control

cannot therefore be used until the end of the four series of flashes.

1. Press the select key for which you want to know the code

and hold down for 5 seconds.

When the key is released it will start to flash; press and

release the 1-/-- key within 8 seconds.

3. After a pause of several seconds, the indicator light produces

four series of flashes with a space between them, corres-

ponding to the code you are looking for. Count the number

of flashes; each series of flashes corresponds to one figure

in the code. 10 flashes correspond to 0.

4. Note the code on the adhesive label inside the battery cover

in case you have to reprogramme the remote control subse-

quently.

To find out the code of your remote control, follow this procedure:

TV FUNCTIONS ALWAYS ACTIVE

If you know the exact code with which to programme the remote control, enter it as follows:

ENTERING THE CODE

1. Hold down the selection key for the appliance to be

programmed for 5 seconds.

2. When the key is released it will start to flash; enter the

code (

e.g. TV 1306

). Three flashes indicate that the

operation has been completed correctly.

The functions

Mute

Vol -

Vol +

and

are memorized on the keys

. These functions

can be used to control appliances other than the TV. For further information consult the on-line guide

on the site www.cme.it

......................................................... = 1

.............................................. = 3

= 0

............................ = 6

Code obtained = 1306

5 SEC.

or or or or

+++

1 306

5 SEC.

or or or or

To use this function,

the remote control you want to copy the signal from must still work.

LEARN FUNCTION

This function allows the remote control to:

Learn the missing functions of an original remote control and memorize them on the keys F1 -

F2 - F3 - F4 or on any other key and thus replace the original remote control.

Learn all the functions of a new remote control introduced subsequently and thus not yet included

in the database of the universal remote control.

Learn the missing functions of an original remote control and

memorize them on any key of the LEARN 5 in 1 remote control.

To copy the signals,

the remote controls must first be placed the correct distance apart.

1. Position the original remote control in front of the universal

remote control, so that the areas that emit the infrared

signals are opposite each other and about 5 cm apart.

NB: A maximum of 85 functions can be learnt.

5 cm

originalCME

1-/--

F2 F3

BACK

MENU GUIDE

EXIT

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cme Toptel 5 - learn in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cme Toptel 5 - learn Manual

Product: