497773

Cme CONTROL 2 Digital Manual

4
Zoom out
Zoom in
Previous page
1/5
Next page
9
DISPLAY CODE IN USE
If you set up the remote control using the MANUAL SEARCH
procedure, obtain and make a note of the code in use as follows:
1. Press and hold down for 6 seconds the device selection
button corresponding to the device you wish to enter the
code for.
2. Release the button. The indicator light will fl ash. Press
the TV / radio button for an instant.
3. After a pause of several seconds, the indicator light pro-
duces four sets of fl ashes, spaced out, corresponding to
the code to be obtained. Count the number of fl ashes.
Each set of fl ashes corresponds to one fi gure in the
code. Ten fl ashes correspond to the fi gure 0.
4. Make a note of the code obtained on the label on the in-
side of the battery cover. You may need it in future.
Code obtained = 1306
6 SEC.
or
ENTERING THE CODE DIRECTLY
(only to be performed if you know the specifi c code to be set)
If they do not appear, repeat the procedure. If the result is still negative, it means the code indicated
is not included in the remote control.
1. Press and hold down for 6 seconds the device selection
button corresponding to the device you wish to enter the
code for.
2. Release the button. The indicator light fl ashes.
Immediately enter the specifi c code previously found.
(e.g. 1306).
3. Three long fl ashes indicate a correct setting.
6 SEC.
or
NOTE: During the search the indicator stops fl ashing and the remote control exits the programming mode in the
following cases:
• if for 12 seconds the button indicated is not pressed or if another button is pressed
• if the list of codes to fi nd is terminated. In this case, visit the www.cme.it website.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cme CONTROL 2 Digital at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cme CONTROL 2 Digital in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info