565514

Cloer 5609 Manual

12
Zoom out
Zoom in
Previous page
1/28
Next page
12
EN
Introduction
Dear Customer,
by buying the Cloer filter coffee maker you
have decided on a quality product complying
with the most modern development standard
regarding technology and functionality.
Make sure you acquaint yourself with the
appliance before and read the operating
instructions carefully.
We wish you pleasure with your new filter coffee
maker.
Setting up
Remove all packaging parts and, if applicable,
stickers, not the rating label.
Place the filter coffee maker on a dry, non-slip
and even surface.
Before using the first time
Read these instructions carefully before first
use.
Prior to brewing coffee for the first time, run
the coffee maker with water only for one or two
times (omitting coffee powder and paper filter).
Open the lid of the water tank and fill in cold
water to the 12-cups marking by using the glass
carafe.
Place the carafe on the warming plate and press
the ON/OFF button to switch on the appliance.
Switch off the coffee maker after the brewing
process and pour away the water.
Safety instructions for operation
The appliance meets the
requirements of the applicable
EC directives.
The appliance is intended for
in door use only.
Use the coffee maker exclusively for making
coffee. Do not fill other liquids or foodstuffs in
the coffee maker.
Fill the water tank with cold water only.
Never operate the appliance without water.
Do not immerse the coffee maker in water or
any other liquid!
ATTENTION: When filling the water tank with
water, avoid the maximum cup marking being
exceeded. A possible bubbling over can cause
a danger of scald!
During use, never open the lid of the water
tank.
ATTENTION!
Always unglug appliance
when not in use!
Setting the time
Prior to starting the very first brewing process
or disconnecting the unit from the mains, you
·
·
·
·
·
·
·
·
·
·
·
·
·
·
should set time on the display.
Insert the plug in the power socket.
The number of hours appears on the screen.
You may also use the arrow keys
to adjust
the hour and then press SET.
The display changes to the minutes, which you
can re-adjust using the arrow keys.
Press SET again, when you are finished.
The time is now set.
If you wish to change the time again (e.g. for
summer / winter time), long press the SET
button and proceed as described above.
Info: If you wish to set the clock to American
time (AM / PM), press and hold SET ca. 2 sec.
to enter the setting mode, and then press the
two arrow keys simultaneously. The display will
change to American time. Now press SET 2x to
complete the process.
Temperature stabilization
Your coffee maker is equipped with a unique
temperature stabilization unit, which ensures
constant brewing temperature and thus the
best coffee results without bitter aftertaste.
This is ensured by the float below the insert
inside the tank. It always allows only small
amounts of water run through the heating
system to achieve optimum brewing
temperature and get the most from your coffee
powder. Coffee can develop its best flavor only if
you ensure the right brewing temperature.
Coffee preparation
Plug cord into a standard electrical outlet.
Open the lid of the water tank.
Use the glass carafe to fill the water tank with
fresh cold water. Check the left scale of the tank
if you do not use BRITA ®MAXTRA® water filter
cartridge or the right scale of the tank, if you use
it (see page 11).
If you like to use coffee maker without BRITA®
MAXTRA® water filter cartridge please remove
the tube (see below) out of the water tank.
Notice: If you use the coee maker without the
tank insert, use the glass carafe to ll in water
and do not exceed the maximum capacity of
the carafe, otherwise water may bubble over
during the brewing process.
Once you have filled the tank, the lighting lights
on indicating operational readiness. Unless you
press the ON/OFF button, otherwise, after 30
seconds, the tank lamp switches off again.
Never fill the tank with water above the
maximum level.
Note: Make sure that the tank insert (with
the float and the BRITA®filter device) is
correctly installed to ensure that the rubber
seal fits properly.
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cloer 5609 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cloer 5609 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info