Manual Climastar SMART EASY TECH RANGES (page 5 of 16) (English)

773885

Zoom out

Zoom in

1/16

5



protect the heater from overheating; therefore, it is essential that at no time

are they covered.

 This heater should be switched off at the isolating switch before any repair

work is carried out. This action should also be taken during the times of the

year when heat is not required.

 The radiator should not be installed just below an electrical socket or in front

of a socket outlet.

 The appliance must be installed in such a way that switches and other control

devices cannot be touched by a person using a bath or shower.

 The installation must be carried out in accordance with the current electrical

regulations.

 The heater is fitted with a flexible cable size 3 x 1.00 mm2 for electrical

connection. It may be used to connect the heater to the fixed wiring of the

premised through a suitable connection box positioned adjacent to the heater.

 The supply circuit to the heater must incorporate a double pole isolating

switch having a contact separation of at least 3 mm.

 If the flexible supply cord is damaged, it must be replaced by a repair

workshop recognised by the manufacturer, in order to avoid hazard.

 All models are supplied with an electrical interrupt cut-out. This will switch

off the heater if, for any reason, it overheats. Should the cut-out operate, turn

the heater off and remove the cause for the overheating. The cut-out will be

reset automatically.

 The presence in the air of particles of smoke, dust and other pollutants could,

in time, discolour the walls and surfaces around the heater.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Climastar SMART EASY TECH RANGES in the language / languages: English as an attachment in your email.

The manual is 0.49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Climastar SMART EASY TECH RANGES Manual

Product: