773863

Climastar SILICIUM HYBRID INVERTER Manual

7
Zoom out
Zoom in
Previous page
1/16
Next page
7
2.7. Stand by
When the control is in this operating mode, the frost protection mode is set up.
If the room temperature drops below 5°C the solenoid valve output activates.
2.8. Temperature selection
Operation
Display
Use these keys to set the desired room temperature value on
the 3 digit display.
The adjustment range goes from 16 to 28 °C, with 0.5°C accuracy. Temperature
values from 5ºC to 40ºC are also possible but only for short periods of time,
after that, temperature should be adjusted to the intermediate values.
2.9. Automatic function
Temperature has to be set as per previous information and then activate the
Auto function.
Key
Operation
Display
Keep the AUTO key pressed. Activation of the function is
indicated by the symbol appearing on the display.
Fan speed and solenoid water valves will adjust automatically in a step by step
process according to both real temperature and set temperature, all based on a
PID algorithm.
2.10. Fan speed adjustment
Key
Operation
Display
Keep any of the two keys pressed. Activation of the function is
indicated by the symbol appearing on the display.
By setting the maximum speed you will immediately reach the set
temperature. After that you should select any of the other 3 operating modes
(Auto, night, minimum) to increase the thermal and acoustic comfort. In
"minimum", the number of rotations of the fan will be limited both in heating
and in cooling
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Climastar SILICIUM HYBRID INVERTER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Climastar SILICIUM HYBRID INVERTER in the language / languages: English as an attachment in your email.

The manual is 0.79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info