711415
59
Zoom out
Zoom in
Previous page
1/208
Next page
59
The name plate attached to the inside or rear of the appliance (depending on the model)
includes all the information specific to your wine cellar.
We recommend that you make a note of its serial number in this booklet prior to installation,
so that you can refer to it later (technical work, request for assistance, etc.)
Once it is installed and loaded, access to it is not so easy.
CAUTION: No assistance can be provided without this information.
4. INSTALLATION INSTRUCTIONS
Before using your wine cellar
Remove the inner and outer packaging. Remove your wine cellar from the transport pallet
by unscrewing the two screws on the frame at the back of the device.
Before connecting the cellar to the electrical socket, leave it in position for 24 hours. This
will reduce the possibility of malfunction of the refrigeration circuit due to transport.
Clean the inside using a soft cloth and lukewarm water.
Using your wine cellar
Your wine cellar must be positioned in a room with an ambient temperature between
+10°C and +32°C. Alternatively, if the cellar is fitted with the winter system, the range is
extended to 0°C to 32°C.
Installing your wine cellar
This wine cellar is designed for free-standing installation.
Position it in a place with sufficient strength to support its weight when loaded.
To get the best from your appliance with the lowest energy consumption, do not place the
appliance close to a heat source (heater, cooker, etc.), do not expose it to direct sunlight,
and do not place it in a room which is too cold.
Plug the cellar into a single outlet.
Screw the stopper supplied inside the wine cellar to maintain a 10 cm minimum distance
between the back of the cellar and the wall in front of it is placed. Ensure that your wine
cellar is perfectly horizontal, then slightly raise the two front feet (use of a spirit level is
recommended). This will prevent any movement due to instability, causing noise and
vibration, and will ensure that the door seals perfectly.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Climadiff CV295 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Climadiff CV295 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info