653704
16
Zoom out
Zoom in
Previous page
1/20
Next page
OPERATING INSTRUCTIONS
INSTALLATION INSTRUCTIONS
(optional
)
Other features
Auto-Restart
If the unit breaks off unexpectedly due to the
power cut,it will restart with the previous
function setting automatically when the powe
resumes..
Wait 3 minutes before resuming operation
After the unit has stopped, it cannot be restarted
operation in the first 3 minutes. This is to protect
the unit. Operation will automatically start after
3 minutes.
POWER MANAGEMENT feature
When the ambient temperature
is
lower than
the
setting temperature for
a
period
of
time, the
unit
will
be
automatically operate power managemen
t
feature. The compressor and fan motor
stop.
When the ambient temperature
is
higher than
the
or
Horizontal
window
Window Slider
Kit
Minimum:67.5cm(2.22ft).
Fig.5
INSTALLATION
INSTRUCTIONS
Location
The air
conditioner should
be
placed
on a firm
foundation
to
minimize noise
and
virbration.
For safe
and
secure positioning, place
the unit on a smooth,
level floor strong enough
to
support
the unit.
The unit has
casters
to aid
placement,
but it
should
only be
rolled
on
smooth,
flat
surfaces.
Use
caution
when
rolling
on
carpet surfaces.
Do not
attempt
to roll the unit
over
objects.
The unit
must
be
placed within reach
of a properly
rated grounded
socket.
Never place
any
obstacles around
the air inlet or
outlet
of the unit.
Allow
at
least 30cm
of
space from
the wall for
efficient
air-conditioning.
Adjust
manually
Adjust
setting temperature, the unit will
be automatically
quit the power management feature.
The
compressor and (or) fan motor
run.
Air flow direction adjustment
(Fig.4):
The louver can be set to the desired position
manually.
Do not place any heavy objects or other loads
on the louver, doing so will cause damage to
the unit.
Ensure the louver is fully opened under
Keep the louver fully opened during
operation.
Maxmum:123cm(4.04ft).
or
Horizontal
window
Window Slider
Kit
Minimum:67.5cm(2.22ft).
Maxmum:123cm(4.04ft).
Window Slider kit Installation
Your
window
slider kit has been
designed
to fit most
standard
"
Vertical
"
and
"
horizontal
"
window
applications,
However,
it may be
necessary
for you to
improvise/modify
some
aspects
of the installation
procedures
for
certain
types of
window. Please
refer
to Fig. 6& Fig.7 for
minimum
and
maximum
window
openings.Window
slider kit can be fixed with a bolt
(see Fig.7a).
Note:
If the
window opening
is less than the mentioned
minimum length
of the
window
slider kit, cut that one
never cut out the hole in
window
slider kit.
Fig.4
Horizontal
window
Window Slider
Kit
Maxmum:123cm(4.04ft).
or
bolt
or
Window slider kit
bolt
Window
slider kit
Fig.7a
Horizon
t
al
window
Window Slider
Kit
Minimum:67.5cm(2.22ft).
Maxmum:123cm(4.04ft).
Fig.7
8
9
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Climadiff Clima 18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Climadiff Clima 18 in the language / languages: English, French as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info