599254

Cleopatra Wellspring 130 Manual

124
Zoom out
Zoom in
Previous page
1/290
Next page
124
Déposer la cabine à proximité du lieu
de montage.
1. Monter les traversées pour le
raccordement d’eau (surplat 36 mm).
Les coudes de raccordement doivent
être dirigés vers le haut.
TWW = eau potable chaude (côté gauche)
DN15 ½”
TWK = eau potable froide (côté droit)
DN15 ½”
2. Monter la traversée pour le raccor-
dement d’eau (surplat 36 mm). La
soupape d’équerre doit être dirigée
vers le haut.
TWW = eau potable chaude DN15 ½”
3. Préparer les raccordements d’eau à
proximité des raccords muraux.
Amener le raccordement électrique
dans la cabine.
4. Monter la poignée support A à l’aide
des vis cylindriques B (M5x20).
Ajuster la position des éléments en
acrylique les uns par rapport aux autres.
Le cas échéant, ouvrir la vis des cornières
de serrage et corriger la position des
éléments.
a.) Ajuster fermement les éléments
latéraux les uns aux autres.
b.) Ajuster fermement les éléments
latéraux au toit.
MONTAGE DES ÉLÉMENTS EN
ACRYLIQUE
Colocar la cabina cerca del lugar de
montaje.
1. Hermetizar las escuadras de conexión
y montar. Las escuadras de conexión
tienen que indicar hacia arriba.
TWW = agua potable caliente DN 15 1/2”
TWK =
Agua potable fría (a la derecha)
DN15 ½“
2. Hermetizar la válvula angular y
montar. La válvula angular debe
indicar hacia arriba.
TWW = agua potable caliente DN 15 1/2”
3. Preparar las conexiones de agua en
el entorno de las conexiones de la
pared.
Introducir la conexión de corriente en
la cabina.
4. Montar el asa de transporte A con
tornillos cilíndricos B (M5x20).
Alinear la posición de los elementos de
acrilo entre sí. Dado el caso, abrir los
tornillos en los ángulos de sujeción y
corregir la posición de los elementos.
a.) Sujetar fuertemente entre sí los
elementos laterales.
b.) Sujetar fuertemente los elementos
laterales con el techo.
MONTAJE DE LOS ELEMENTOS
ACRÍLICOS
Plaats de cabine in de buurt van de
plaats van montage.
1. Monteer de doorvoerelementen voor
de wateraansluiting (SW 36 mm). De
aansluithoekstukken moeten naar
boven wijzen.
TWW= drinkwater warm (links) DN15 ½”
TWK=
drinkwater koud (rechts) DN15 ½”
2. Monteer de doorvoerelementen
voor de wateraansluiting (SW 36
mm). De hoekafsluiter moet naar
boven wijzen.
TWW= drinkwater warm DN15 ½”
3. Bereid de wateraansluitingen in de
buurt van de wandaansluitingen
voor.
Voer de stroomkabel in de cabine.
4. Monteer handgreep A met de cilin-
derkopschroeven B (M5x20).
Lijn de positie van de acrylelementen ten
opzichte van elkaar uit. Draai zo nodig
de schroeven van de klemhoekstukken
los en corrigeer de positie van de
elementen.
a.) Bevestig de zijelementen stevig aan
elkaar.
b.) Bevestig de zijelementen stevig aan
het dak.
MONTAGE ACRYLELEMENTEN
(WELLSPRING 130)
… 124 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleopatra Wellspring 130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleopatra Wellspring 130 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 28,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info