Manual Cleopatra Wellspring 130 (page 83 of 290) (English, German, Dutch, French, Italian, Polish, Spanish)

599254

Zoom out

Zoom in

1/290

DeutschEnglish

As soon as a warning is displayed, the steam function can no longer be used!

Warnings can be not deleted; press the light push-button to ignore a warning. If the functional state does not change, the

warning is displayed again when the respective function is selected again.

After pressing the light push-buttom at warning A19, an automatic drain process of steam generator will be starting.

Error messages can be eliminated without loss of data with a mains reset (switching the FI switch off and on again after 10

seconds).

Warning Type of Malfunction / Cause Possible Cause Possible Clearance

A13 - Filling failure at the start of

steaming in the first 3

minutes, i.e. lower and

upper water levels not

reached (e.g. during initial

start-up)

- Solenoid valve error

- Level sensor error

(Symptom: Water emerges

from the drain pipe during

steam operation)

- Steam module error

- Ball valve before steam

generator closed

- Filter in connection bracket

of steam generator clogged

- Insufficient on-site water

supply

- Solenoid valve defective or

disconnected

- Level sensor defective or

disconnected

- Steam module defective or

no voltage supply

- Open ball valve

- Clean filter in connection

bracket

- Ensure sufficient water

supply

- Replace solenoid valve

membrane or connect

cable (cable on steam

module with “Fill” marking)

- Replace level sensor or

connect cable (cable on

steam module with “Level”

marking)

- Replace steam module or

connect cable (cable on

steam module with “Mains

230V” marking)

A14 - Filling at the start of

steaming in the first 3

minutes insufficient, i.e.

lower water level reached,

but not upper water level

- Ball valve before steam

generator closed

- Filter in connection bracket

of steam generator clogged

- Insufficient on-site water

supply

- Solenoid valve defective or

disconnected

- Open ball valve

- Clean filter in connection

bracket

- Ensure sufficient water

supply

- Replace solenoid valve

membrane or connect

cable (cable on steam

module with “Fill” marking)

A16 - Maximum cabin

temperature of 55°C

exceeded

- Safety cut-out when

maximum allowed cabin

temperature exceeded

- Allow cabin to cool down

A17 - Drain process of steam

generator defective

- Generator calcified, i.e. drain

outlet and / or pipe clogged

- Remove generator and

clean generator including

drain pipe

A18 - Measured values from

cabin temperature sensor

out of tolerance

- Cabin temperature sensor

defective or disconnected

- Replace or connect cabin

temperature sensor

A19 - Steam generator is filled up

or is filled particular when

starting

- Solenoid valve defective

(untight)

- Clean solenoid valve

membrane or replace it

K IV STEAM PLUS CONTROL

Italiano

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cleopatra Wellspring 130 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 28,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cleopatra Wellspring 130 Manual

Product: