599254

Cleopatra Wellspring 130 Manual

28
Zoom out
Zoom in
Previous page
1/290
Next page
28
Kabine in Nähe des Einbauorts
abstelllen.
1. Durchführungen für Wasseranschluss
monti e ren (SW 3 6 mm). D ie
Anschlusswinkel müssen nach oben
zeigen.
TWW = Trinkwasser warm (links) DN15 ½“
TWK = Trinkwasser kalt (rechts) DN15 ½“
2. Durchführung für Wasseranschluss
montieren (SW 36mm). Das Eckventil
muss nach oben zeigen.
TWW = Trinkwasser warm DN15 ½“
3. Wasseranschlüsse in Nähe der Wand-
anschlüsse vorbereiten.
Stromanschluß in die Kabine einführen.
4. Tragegriff A mit Zylinderschrauben B
(M5x20) montieren.
Position der Acrylelemente zueinander
ausrichten. Gegebenenfalls Schrauben
an den Klemmwinkeln öffnen und die
Position der Elemente korrigieren.
a.) Seitenelemente fest miteinander
verklemmen.
b.) Seitenelemente fest mit dem Dach
verklemmen.
MONTAGE ACRYLELEMENTE
WELLSPRING 130
Putting cubicle into proximity of the
installation place down.
1. Install the lead-throughs for water
connection (SW 36mm). The connec-
tion brackets must point upwards.
TWW = hot water (left)
DN15 ½“
TWK = cold water (right)
DN15 ½“
2. Install the lead-through for water
connection (SW 36mm). The corner
valve must point upwards.
TWW = hot water
DN15 ½“
3. Preparing water connections into
proximity of the wall connections.
Connection into the cubicle.
4. Assembling carrying handle A with
top-hat screws B (M5x20).
Adjust the position of the acrylic
elements to each other. If necessary,
opening screws at the sticking angles
and correcting the position of the
elements .
a.) Seize side elements with each other
tightly.
b.) Seize side elements with the roof
tightly.
INSTALLATION OF ACRYLIC
ELEMENTS WELLSPRING 130
Portare la cabina vicino al luogo di
montaggio.
1. Montare i passanti per l‘allacciamento
dell’ acqua (SW 36mm). I gomiti di
alimentazione vanno posizionati
verso l’alto.
TWW = acqua potabile calda (sinistra)
DN15 1⁄2”
TWK = acqua potabile fredda (destra)
DN15 1⁄2”
2. M o n t a r e i l p a s s a n t e p e r
l‘allacciamento dell’ acqua (SW
36mm). La valvola angolare va
posizionata verso l’alto.
TWW = acqua potabile calda DN15 1⁄2”
3. Preparare gli attacchi dell’acqua
vicino agli attacchi a muro.
Far entrare l’allacciamento elettrico
nella cabina.
4. Montare la maniglia di trasporto
A con le viti a testa cilindrica B
(M5x20).
Allineare le posizioni degli elementi
acrilici. All’occorrenza, svitare le
viti sugli angolari di fissaggio e
correggere la posizione degli
elementi.
a.) Incastrare bene tra di loro gli elementi
laterali.
b.) Incastrare bene gli elementi laterali
con il tetto.
MONTAGGIO DEGLI ELEMENTI
ACRILICI WELLSPRING 130
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleopatra Wellspring 130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleopatra Wellspring 130 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 28,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info