Manual Cleopatra WellPool 430 (page 60 of 68) (English, German, Dutch)

599196

Zoom out

Zoom in

1/68

0

TROUBLE SHOOTING

Type of Malfunction / Cause Possible Cause Possible Clearance

x Air system does not function x Check you have an electricity supply?

 Malfunction in electrical mains

 Are the plug connections to the

control correctly seated?

x Control does not react

x Control defective

x Control element defective

x Blower defective

 Call electrician

 Pull and reinsert plug

x Reconfigure Poolmaster

x Replace control

x Replace control element

x Replace blower

x Hydro system function insufficient

x Hydro system does not function

x Filter at intake socket is blocked

x Nozzle dirty

x Is voltage applied?

 Malfunction in electrical mains

 Are the plug connections to the

control correctly seated?

x Is the water level high enough?

x Water level sensor does not react

x Control does not react

x Control defective

x Control element defective

x Hydraulic pump defective

x Remove cover at intake socket and

clean filter (see service)

x Clean nozzle (see service)

 Call electrician

 Pull and reinsert plug

x Continue to fill tub

x Adjust sensor

x Replace sensor

x Reconfigure Poolmaster

x Replace control

x Replace control element

x Replace hydraulic pump

x System switches itself on without an

obvious reason

x Automatic cleaning function of the air

nozzles

x Has the room temperature changed

(e.g. floor heating underneath the

whirlpool)

x Has the humidity in the room changed

(e.g. use of a shower in the same room)

x Were cables, water pipes or other

electrically conductive materials laid in

the area of the water level sensor?

x Is/was cleaning work performed near

the tub? (e.g. moist cleaning cloth near

the water level sensors)

x Okay

x Readjust sensitivity of the water level

sensor

x Readjust sensitivity of the water level

sensor

x Reposition cables, water pipes or similar

x Remove objects from the tub

x Water nozzle x Nozzle dirty

x Nozzle head not adjustable

 is seized

 is loose

x Clean nozzle (see service)

 Reposition O-ring behind head

 Replace O-ring behind head

Leakage:

x air

x Water underneath the tub

x Air hose loosened on:

 Blower

 Air distributor

 Air nozzle

x Hydro hose loose on:

 Pump

 Hydro nozzles

x Drain/overflow defective?

x Seals on nozzles leaking?

x Acrylic material damaged?

x Tub inflow connection leaking?

x Tighten hose clamp / disconnect and

reconnect hose

x Retighten hose clamp

x Replace seals

x Repair acrylic material with repair sets

x Replace seals

x Underwater lighting does not switch on x Is the water level high enough?

x Lighting element defective?

x Is voltage applied?

 Malfunction in electrical mains

 Are the plug connections to the

control correctly seated?

x Water level sensor does not react

x Continue to fill tub

x Replace lighting element

 Call electrician

 Pull and reinsert plug

x Adjust sensor

x Replace sensor

Disinfektion:

x Can not be started

x Switches off during the process

x Is the water level high enough?

x Is the disinfectant container adequately

filled?

x Continue to fill tub

x Replenish container with disinfectant.

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cleopatra WellPool 430 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 5,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cleopatra WellPool 430

Cleopatra WellPool 430 Additional guide - English, German, Dutch - 1 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cleopatra WellPool 430 Manual

Product: