599257
10
Zoom out
Zoom in
Previous page
1/76
Next page
10
Installation tool/ Installation sequence
Dimensions
The panel is movable 00 mm downward.
The stated dimensions refer to the highest position of the panel.
Technical Data
Note
Points out information to the aected personnel, whose content
is important and must be taken into consideration.
Water connection
Warm water
Water connection
Cold water
Installation sequence
Silicone (free from acetic acid!)
Observe all current and water lines when
drilling!
Technical Data
Operating pressure: max. 1,0 MPa
Recommended operating pressure: 0, - 0,5 MPa
Test pressure: 1,6 MPa
Hot water temperature: max. 80° C
Recommended hot water temp.: 65° C
Connections G 1/
Rate of ow by 0, MPa:
hand shower 15,4 l/min
body showers, _1a pieces 14,5 l/min
overhead shower 1,7 l/min
overhead shower + body showers 0,5 l/min
hand shower + body showers 1 l/min
Flow heater
Applicable for ow heaters at min. 4 kW and 0,15 MPaow pressure before the
Shower panel and a minimum through ow of 7 l/minute. Only one consumer possible,
not two simultaneously.
Pressure dierences
The pressures of the cold and hot water connections must be balanced.
non return valve
The non return valves must be checked regularly according to DIN EN 1717 in
accordance with national or regional regulations (at least once a year).
Wall mount (see page 64)
Corner installation (see page 68)
Special accessories
corner tting set (61X000 ) order as an extra
Installation Instructions
Check for required minimum height of 00 mm from shower tray oor
before starting installation
The indicated installation dimensions apply to a person that is about
1,8000 mm tall. If the dimensions have to be adapted to shorter or
taller persons, you must make sure that the minimum tub standing height
of ,00 mm will also change. This will also alter the connection and
boring hole dimensions.
Gloves should be worn during installation to prevent crushing and
cutting injuries.
Where the contractor mounts the product, he should ensure that the
entire area of the wall to which the mounting plate is to be tted, is at
(no projecting joints or tiles sticking out), that the structure of the wall is
suitable for the installation of the product and has no weak points. The
enclosed screws and dowels are only suitable for concrete. For another
wall constructions the manufacturer’s indications of the dowel manufac-
turer have to be taken into account.
The mesh washers must be installed to protect against incoming dirt by
pipework. Incoming dirt can impair the function and/or lead to dama-
ges on functional parts of the xture; HansGrohe will not be held liable
for resulting damages.
The arm of the shower head is intended only to hold the shower head.
Do not load it down with other objects!
Important! The tting must be installed, ushed and tested after the valid
norms.
Operation (see page 74)
The shower system may only be used for bathing, hygienic and body
cleansing purposes.
Children as well as adults with physical, mental and/or sensoric
impairments must not use this shower system without proper supervision.
Persons under the inuence of alcohol or drugs are prohibited from
using this shower system.
Do not allow the streams of the shower touch sensitive body parts (such
as your eyes). An adequate distance must be kept between the shower
and you.
The product may not be used as a holding handle. A separate handle
must be installed.
English
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleopatra Pharo Lift 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleopatra Pharo Lift 2 in the language / languages: All languages as an attachment in your email.

The manual is 7,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info